CHD25 series 9 axis cnc turning and milling center
USD $100,000 - $350,000 /Set
Min.Order:1 Set
CHD25 series 9 axis cnc turning and milling center
Specifications | Unit | Parameter | Parameter |
Max. swing over bed | mm | 650 | 650 |
Max. turning length | mm | 1000 | 1500 |
Max. turning diameter over upper carriage | mm | 500 | 500 |
Max. turning diameter over lower carriage | mm | 330 | 330 |
Travel of X1- axis | mm | 520 | 520 |
Travel of Z1-axis | mm | 1180 | 1680 |
Travel of Y-axis | mm | ± 105 | ± 105 |
Rotary angle of B-axis | ° | ± 102.5 | ± 102.5 |
Travel of X2-axis | mm | 220 | 220 |
Travel of Z2-axis | mm | 1100 | 1600 |
Travel of W-axis | mm | 1020 | 1520 |
Rapid traverse of upper carriage (X1 /Y/Z1-axis): | m/min | 24/16/30 | 24/16/30 |
Rapid traverse of lower carriage: (X2/Z2-axis): | m/min | 24/24 | 24/24 |
Rapid speed of 2nd spindle(W-axis) | m/min | 24 | 24 |
mm | 0.001 | 0.001 | |
° | 0.001 | 0.001 | |
Motor power of 1st spindle | kW | 18.3/22.4 | 18.3/22.4 |
Motor power of 2nd spindle | kW | 14.5/18.7 | 14.5/18.7 |
Max. Speed of 1st spindle | r/min | 5000 | 5000 |
Max. Speed of 2nd spindle | r/min | 5000 | 5000 |
Spindle bore taper of 1st spindle |
| metric 100 | |
Spindle bore taper of 2nd spindle |
| metric 100 | |
Spindle nose: ISO A2-8 of 1st spindle |
| ISO A2-8 | ISO A2-8 |
Spindle nose: ISO A2-8 of 2nd spindle |
| ISO A2-8 | ISO A2-8 |
Spindle through-hole dia. of 1st spindle | mm | Ø 80 | Ø 80 |
Spindle through-hole dia. of 2nd spindle | mm | Ø80 | Ø80 |
Motor power of tool spindle | kW | 16.9 | 16.9 |
Output torque of tool spindle | Nm | 100 | 100 |
Spindle speed of tool spindle | r/min | 7000 | 7000 |
Tool shank of upper carriage |
| Capto C6 | Capto C6 |
Tools in the magazine |
| 30 tools | 30 tools |
Tool shank of lower carriage(external tool) | mm | 25 x 25 | 25 x 25 |
Max. speed of power tool on lower carriage | r/min | 4500 | 4500 |
Machine overall dimension | mm | 7230 x 3150 x 3755 | 7730 x 3150 x 3755 |
Machine weight | kg | 15000 | 16000 |
Control system(standard) |
| siemens840D | siemens840D |
S.N | Name | Remark |
1 | Guide ways and leadscrew |
|
2 | Main spindle |
|
3 | Sub spindle |
|
4 | Upper turret |
|
5 | Lower turret |
|
6 | Hydraulic unit |
|
7 | Cooling unit |
|
8 | Chip removal unit |
|
9 | CNC system |
|