CKE6180/100/125M large cnc horizontal lathe
- Construction casting molded with resin sand of bed, headstock, saddle plinth, etc;
- Turcite-B coated on mating surfaces between saddle and guide ways;
- Precision ballscrew, high rigidity precision compound bearings ensure accurate positioning and efficient driving. Centralized oil lubricator providing forced automatic lubrication onto ballscrew, mating surfaces;
- High spindle speed with wide variable speed ranges. Low noise 80db,CKE-Zseries machine adopting the smart automatic gear changing mechanism enables automatic speed changes among low,medium,high speed ranges without turning off the machine
- CKE-i series with independent spindle structure and frequency converted motor or servo motor enables high spindle speed and stepless spindle changing.
- Flexible control panel enables convenient tool setting.
- Popular full enclosed guards with interlock offer a waterproof and chip-free environment.
- Vertical 4-p toolpost,horizontal 6-p toolpost,quick change toolpost,etc are available for your selection;
Item | CKE6180Z | CKE61100M | CKE61125M |
Max. swing over bed(mm) | 800 | 1000 | 1250 |
Width of bed (mm) | 550 | 755 | 755 |
Max. length of work piece (mm) | 1000~4000 | 1000~8000 | 1500~8000 |
Max. swing over slide(mm) | 490 | 630 | 880 |
X travel (mm) | 420 | 520 | 640 |
Z travel (mm) | 790~3790 | 1400~7900 | 1400~7900 |
Spindle nose | C11 | A2-15 | A2-15 |
Chuck size (mm) | 400 |
|
|
Taper of spindle bore | 1:20 | 1:20 | 1:20 |
Spindle bore (mm) | 100 | 130 | 130 |
Steps of spindle speed | 4-step actuator | 4-step actuator | 4-step actuator |
Frequency conversion motor power (kW) | 11 | 22 | 22 |
Rapid traverse X/Z (m/min) | 4/8 | 6/8 | 6/8 |
Vertical 4-position Tool post changing time (s) | 2.6 | 4.0 | 4.0 |
Horizontal 6-position Tool post changing time(s) | 3.0 | 3.0 | 3.0 |
Diameter of tailstock quill (mm) | 100 | 200 | 200 |
Travel of tailstock quill (mm) | 240 | 300 | 300 |
Taper of tailstock quill | M5 | M6 | M6 |
