Product Details

CDE6150x750 metal lathe machine

Recommended Lathes

CDS6250(Ø500mm) Conventional Horizontal Lathe Machine

Main Usage

Such metal cutting lathe machine are mainly for:

It can machine inner circle, outer circle, and end and head surface, taper surface.

Gap lathe can process the deformation parts.

Function is including the drilling and reaming. Metric, inch, diametrical pitch, module thread.

Main Features

Such metal cutting lathe machine has following features:

Spindle nose: C6-type (No D-type spindle nose)
Chucktype: Direct-coupled;
New improved direct-coupled 3-jaw, 4-jaw chuck;
The bed is made of high-grade cast iron, the guide way is super audio frequency quenching.
Guide rail width: 394mm;
Guide rail hardness: HRC50,Depth 1.5mm
Max load capacity between two centers: 500kg;
Provide left and right wheel,
Apron with rapid shift handle in longitudinal and cross direction;
Special indication is required iftailstock sleeve is with a scale;
Mechanical clutch is used for such lathe. No foot brake, No electrical cabinet;
Direct-coupled chuck;

Main Technical Data

Specifications	Unit	CDE6150x750 metal lathe machine
Max. swing over bed	mm	500
Max. swing over carriage	mm	290
Max. swing over gap(optional)	mm	760
Width of guide way	mm	394
Dia. of spindle bore	mm	52
Distance between centers	mm	750
Taper of center sleeve		Morse No.6
Spindle speed	rpm	11~1400 /22speeds
Longitudinal feed	mm/rev	0.035-2.842
Cross feed	mm/rev	0.009-0.804
Metric thread	mm	0.5-240(66)
Inch thread	tpi	80-1/4(49)
Module thread	mm	0.25-120(57)
Diametrical pitch thread	DP	160-7-16 (50)
Section of tool shank	mm	25×25
Travel of top slide	mm	150
Max. travel of cross slide	mm	348
Pitch of longitudinal lead screw	mm	12
Travel of tailstock center sleeve	mm	150
Diameter of tailstock center sleeve	mm	75
Taper of tailstock center sleeve	Morse	Morse No.5
Main motor power	kW	7.5kW(50Hz) /5.5kW(60Hz)
Wooden case/Steel pallet	mm	2580×1120×1610

Workshop Photos