CDS6250Bx1000 tornos horizontal metal lathes
Specifications | Unit | Parameter |
Max. swing over bed | mm | 500 |
Max. swing over carriage | mm | 290 |
Max. swing over gap | mm | 760 |
Width of gap | mm | 250 |
Max. length of work piece | mm | 1000 |
Width of guide way | mm | 394 |
Spindle nose |
| D8 |
Spindle speed | rpm | 26~2000 |
Dia. of spindle bore | mm | 82 |
Taper of spindle bore |
| 90/1:20 |
Longitudinal feed | mm/rev | 0.044~1.48 |
Cross feed | mm/rev | 0.022~0.74 |
Metric thread | mm | 0.35~80 (53 or 77) |
Inch thread | tpi | 7/16~80 (47) |
Module thread | mm | 0.2~40 (45 or 66) |
Diametrical pitch thread | DP | 7/8~160 (42) |
Max. travel of cross slide | mm | 348 |
Travel of top slide | mm | 150 |
Travel of tailstock quill | mm | 150 |
Diameter of tailstock quill | mm | 75 |
Taper bore of tailstock quill |
| M5 |
Main motor power |
| 10HP(7.5kW) 15HP(11kW.OPTIONAL) |
Packing size | mm | 2780×1120×1800 |
Weight | kgs | N.M. 2170 G.W. 3180 |
S.N | Name | Size(mm) | Note |
1 | 3-jaw chuck | Φ250 mm | For CDS6250B |
2 | Steady rest | Φ30~Φ200 mm | For CDS6250B |
3 | Follow rest | Φ20~Φ100 mm | For CDS6250B |
4 | Catch plate | 1 Set |
|
5 | Dead center | D115, DB1221 |
|
6 | Center sleeve | 1 Set |
|
7 | Oil gun | 1 Set |
|
8 | Wrench tool | 1 set |
|
9 | Foundation bolt | 1 set |
|
10 | Foot brake | 1 set |
|
11 | Protection of leadscrew | 1 set |
|
