Product Details

CDE6240x750 horizontal lathe machine

Recommended Lathes

CDS6256(Ø560mm) Hot-sale Conventional Horizontal Lathe

CW6280Ex3000(Ø800mm) Widely-used Conventional Horizontal Lathe Machine

Main Usage

Such conventional metal gap lathe machine has following usages:

It can machine inner circle, outer circle, and end and head surface, taper surface;

Gap lathe can process the deformation parts;

Function is including the drilling and reaming;

Threads cutting: Metric, inch, diametrical pitch, module thread;

Main Features

Such conventional metal lathe machine has following features:

Spindle nose: C6-type (No D-type spindle nose)
Chucktype: Direct-coupled;
New improved direct-coupled 3-jaw, 4-jaw chuck;
Guide rail width: 394mm;
Guide rail hardness: HRC50,Depth 1.5mm
Max load capacity between two centers: 500kg;
Provide left and right wheel,
Apron with rapid shift handle in longitudinal and cross direction;
Special indication is required iftailstock sleeve is with a scale;
Mechanical clutch is used for such lathe. No foot brake, No electrical cabinet;
The precision can reach up to IT7 level; the surface roughness can be up to 1.6 grade;

Main Technical Data

Specifications	Unit	Parameter of cde6240 horizontal lathe
Max. swing over bed	mm	Φ400
Max. swing over carriage	mm	Φ220
Max. length of work piece	mm	750
Max. swing over gap	mm	Φ700
Width of guide way	mm	394
Dia. of spindle bore	mm	Φ52
Taper of center sleeve	rpm	Morse No.6
Spindle speed	mm/rev	11~1400/22
Longitudinal feed	mm/rev	0.035~2.842
Cross feed	mm/rev	0.009~0.804
Metric thread	mm	0.5~240(66)
Whitemouth thread	tpi	80~1/4(49)
Module thread		0.25~120(57)
Diametrical pitch thread	DP	160~7~16 (50)
Section of tool shank	mm	25×25
Travel of top slide	mm	150
Max. travel of cross slide	mm	348
Pitch of longitudinal lead screw	mm	12
Travel of tailstock center sleeve	mm	150
Diameter of tailstock center sleeve	mm	Φ75
Taper of tailstock center sleeve	Morse	No.5
Main motor power	kW	7.5(50Hz)/5.5 (60Hz)
Wooden case/Steel pallet	mm	2740/2580×1150×1900
Gross/net weight	Kg	2670/1970

Free Std Accessories

S.N	Name	Remark
1	3-jaw chuck	Φ250 mm K11250C/C6
2	V-belt	B2210 (For CDE6240A 50HZ)
3	V-belt	B2261 (For CDE6240A 60HZ)
4	Dead center	D115, DB1221
5	Oil gun	1 set
6	Wrench tool	1 set
7	Foundation bolt	1 set
10	Instruction Manual in English	1 set
11	Certificate of Conformity	1 set
12	Packing List	1 set

Optional Accessories

Pls send inquiry to me for optioanl accessories and other further information about such lathe machines.

Photos of Workshop: