Food Grade 3003 Aluminum Foil
Negotiable /Ton
Min.Order:6 Tons
Gongyi Shengzhou Metal Products Co.,Ltd.
Product introduction of Food Grade 3003 Aluminum Foil
Good formability, good rust and corrosion resistance, good weldability and plasticity
3003 is an AL-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum), and it cannot be heat-treated and strengthened. Therefore, cold working method is used to improve its mechanical properties: It has high plasticity in annealing state, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability and poor machinability. Uses are mainly used for low load parts requiring high plasticity and good weldability in liquid or gaseous media, such as fuel tanks, gasoline or lube oil conduits, various liquid containers and other small load parts made with deep drawing: Wire is used to make rivets.
3003 aluminum foil has good formability, solvability and corrosion resistance. It is used to process parts that require good formability, high corrosion resistance and good weldability, or to meet the production requirements that require both these properties and higher strength than the 1 series alloy.
Product parameters of Food Grade 3003 Aluminum Foil
Typical alloy | 3003 aluminum foil |
Temper | O,H12,H14,H16,H18,H19,H22, H24,H26,H28,H32,H34,H36,H38 |
Thickness (mm) | 0.2-6 |
Width (mm) | >2000 |
Length (mm) | >6000 |
Typical product | Power battery case, mobile phone case, etc. |
Chemical composition of Food Grade 3003 Aluminum Foil
Alloy grades | 3003 | |
Si | 0.60 | |
Fe | 0.70 | |
Cu | 0.05-0.20 | |
Mn | 1.0-1.5 | |
Mg | — | |
Cr | — | |
Zn | 0.10 | |
Ti | — | |
Zr | — | |
Other | Each | 0.05 |
Total | 0.15 | |
Al | margin |
Mechanical properties of Food Grade 3003 Aluminum Foil
Alloy grades and Temper | 3003-H24 |
Tensile strength Rm/Mpa | 148-185 |
Yield Strength Rp0.2/Mpa | 115 |
Elongation% | 4 |
Solidity/HBWα | 45 |
Physical property of Food Grade 3003 Aluminum Foil
Alloy grades and Temper | 3003-H24 |
Thermal expansion coefficient (20-100℃) µm/m·k Rm/Mpa | 23.6 |
Melting point range (℃) Rp0.2/Mpa | 643-654 |
Conductivity 20℃ (%IACS) | 41 |
Resistivity 20℃ Ωmm2/m | 0.042 |
Density (20℃)(g/cm3) Ωmm2/m | 2.75 |
Quality characteristics of Food Grade 3003 Aluminum Foil
Density: 2.750g/cm³
Poisson's ratio: 0.35 at 20℃(68F)
Elastic Modulus: stretching: 70GPa(10.2×106psi)
Cut: 25GPa(3.6×106psi)
Introduction of our company
Gongyi Shengzhou Metal Products Co.,Ltd. is a professional Aluminium Coil Suppliers and Aluminum Circles manufacturers,mainly supply Aluminum Circles, Aluminium discs, Aluminum Strip, Food Box Material Aluminum Foil, Aluminum Circles for Kitchenware etc. series of aluminum products, sincerely welcome everyone to visit.
Contact information:
/
MOBILE: +86.15137196538
Tel: +86.371.60266515
SKYPE: yoyo@cncablewire.com
Whatsapp: +86.15137196538
E-MAIL: yoyo@cncablewire.com