Product Description

When gold mining pan intends to design and production , we are planning to design a “ normal type ” and a “ professional type ”.The normal type is lighter and simple,its connecting mode is with riveting instead of welding.However ,the cost of the plastic material or metal material is only half of the professional one’s.But we only product professional type in order to guarantee its quality and effectiveness in using.Because the professional type has been make to be more stronger.It is almost destructible,even we can drive a car ran over it.also the cost will be more higher,each pan will cost six hours of labor input.
Production Introduction
-The material is aviation aluminum,can not be bending and cutting.
-With very light weight , only 2.5 kg
-All gaps are connecting with TIG welding.
-Mesh sieve is making by steel bar(diameter:6mm).Hand-made and TIG welding
-TIG welding will use 36 process for each gold mining pan
-Each pan will cost 6 hours of labor input.
-Guarantee 5 years
The professional gold mining pan is designed for professional prospecting and commercial operation.the equipment works ultra fast and high-efficiency.
Packing size :520*320*250mm ?Weight :3 kg

Gold mining pan’s working step:

The first step :Put into the water.

Put the pan into water,the water will fill up from down to up,the sand will float and the heavy metal will be sinking.the water from outside only into the lower part,

The second step :Cleaning materials

This step will cost 5-10s. The time depends on the proportion of clay.in this step the heavy materials and the gold will be separating.

The third step: Discharge tailing
Uplift the pan slowly,shaking lightly.Sand float and the fine stuff will be sinking into pan’s bottom.the density of gold is more bigger,they are sinking ,after that we only need to clean the extra stones in the pan.
A.Big stones are separated on the upper space.little grainy materials flow water into the below area.when you uplift the pan out of the water.water will rinses the material below.
B.Both sides have a outlet,and heavy metal is sinking rapidly.
C.C part is a leather cushion with special treatment,Main function is using for gold absorption,and keeping immovability.
D.The special designed outlet is used to drain water from both sides.and when you need to clean stones even is dumping.the necessary materials at the bottom of the pan will not dump outside.