Product Details

High pressure hose

Specifications

1. flexible rubber sand blast hose
2. steel wire braided or fabric and cord
3. Hose coupling available
4. manufacture

The Sand Blast Hose is used for conducting sand, steel, shot or other abrasives at high velocity, often in conjunction with blasting, cleaning or finishing stone, metal, and other surfaces.Construction consists of thick plies of an abrasion resistant, static-conducting tube, with a black abrasion resistant cover. Used with OD mounted sand blast couplings.

Temperature range is -25F to 180F.

		hose lining	The outer rubber
Tensile Strength Mpa% ≥		15.0	13.0
derrick wagon crane Mpa% ≥		530	320
Test conditions for hot air70℃×72H	Variation of tensile strength %	±25
	Elongation at break %	+10 -30
The wear volume (cm3) ≥		0.35
The adhesion strength between the layers ≥		2.0

ID (mm)	ID (inch)	OD (mm)	PLIES	Working pressure
ID (mm)	ID (inch)	OD (mm)	PLIES	(psi)	(bar)
13	1/2	1*1/32	2	150	10
19	3/4	1*3/8	2	150	10
25	1	1*9/16	2	150	10
32	1-1/4	1*27/32	2	150	10
38	1-1/2	2*1/8	2	150	10
51	2	2*11/16	2	150	10

Packaging & Shipping