CNC multi-function glass laminating machine by water jet
USD $35,000 - $60,000 /Set
Min.Order:1 Set
henan CNC Glass Cutting Machine Co.,Ltd
The APW glass cutting machine is widely used for cutting a wide variety of glass products, from ultra-thin panels to thick multi-layered bullet-proof panels for vehicles and buildings to panels for stained glass windows. The APW has the capability perform a low pressure pierce that automatically switches to high pressure mode to continue the tool path. This means that even the most brittle glass can easily be pierced to create a starting point and yet still be cut at maximum speed. The only glass that can’t be cut is tempered glass, designed to shatter into tiny pieces if cut or broken.
There are four parts in our laminated glass cutting machine. They are intensifier pump; cutting table; CNC controller and Auto abrasive feeder.
The technical parameters for glass laminating machine showing in the following chart:
A glass laminating machine is made up of 4 key components, that is Intensifier pump; Cutting table; CNC controller; Auto abrasive feeder | |||
Intensifier Pump | Max. water pressure | 410Mpa | |
Continuous working pressure | 360-380Mpa | ||
Max. oil pressure | 20Mpa | ||
Motor power | 37KW/50HP | ||
Cutting water inlet pressure | 0.3Mpa | ||
Cooling water inlet pressure | 0.3Mpa | ||
Power supply | 380V/50HZ/3PH | ||
Max. flow rate | 3.7L/Min | ||
Oil tank volum | 30Gal.(114L) | ||
Cutting Table | Structural style | Bridge style | |
Cutting area | 3000x2000x150mm | ||
Max. moving speed for X/Y-axis | 6000mm/min | ||
Max. moving speed for Z-axis | 1000mm/min | ||
Load bearing | 500kg/ Squre meter | ||
Control accuracy | 0.01mm | ||
Cutting accuracy | 0.1mm | ||
Power supply | 220V | ||
Way of drive | AC Servo | ||
X/Y-axis structure | Aluminum structure | ||
Cutting Head | Mode | 3-axis | |
Max. orifice diameter | 0.33mm | ||
Max. nozzle diameter | 1.02mm | ||
Z-axis step motor | 0.9N.M | ||
CNC Controller | 15 inch LCD monitor | ||
Support DXF and NC code file | |||
Software: Windows XP | |||
Resistance of the shoch and electro-magnetic | |||
The key function | |||
Forward & backward processing function | Even pace control function | ||
Small arcs speed auto processing function | Circle processing function | ||
Partial and smooth processing modes | |||
Abrasive Feeder | Max. inlet air pressure | 0.6Mpa | |
Min. inlet air flow | 0.028m3/min | ||
Abrasive capacity | 225KG | ||
Features | |||
Air valve to prevent jams and breakages | Self sealing | ||
Auto control with CNC auxiliary function | Slightly adjust the flow |
Dual-Core Waterjet Debut
APW pioneered “Dual-Core” waterjet, which integrated SIEMENS motor, imported REXROTH hydraulic pump and hydraulic valves assembly, American A&V intensifier, American high pressure tube and stainless steel water tank. This dual intensifiers design (for glass laminating machine ) represents another landmark in APW history.
They has been widely used in all APW waterjet series. UP to now, APW is still the only waterjet manufacturer holding this advanced technology in China.
Imported components
We adopt the imported components like Rexroth hydraulic pump; USA intensifier; Siemens motor; Omron PLC; Yaskawa servo driver, Yuken direction control valves etc. The whole parts of intensifier is assembled in USA (not just some parts), most of the smaller parts are also imported from USA to ensure its good stability during cutting, durability and long working service life.
Abrasive waterjet cutting technology is a great method for cutting glass because it allows for contours and shapes that cannot be achieved with other cutting machines at a reasonable cost. From artistic tabletop inlays to detailed stained glass designs, mirrors, glass ornaments, replacement windows for antique cars, and more, there’s almost no glass cutting application that a waterjet cutting machine from APW Waterjet can’t tackle.
The features of glass laminating machine
1. Allows for complex and fine profiles that cannot be achieved with other methods at reasonable costs
2. Glass does not crack during processing
3. Suitable for the cutting of various glass types
4. Cuts glass panels up to 20 cm in thickness
5. No need to change tool when changing from thin glass to thick glass
6. No or reduced need for reworking of the cut edge
7. No wastage of material, narrow cutting gap
8. Efficient method to produce holes in glass
9. No need for resharpening the tool
(Not suitable for the processing of hot glass.)
The cutting speed for glass laminating machine
The cutting speed of glass laminating machine. We usually use the 80# garnet, it is about 25kg per hours.
More information about APW waterjet glass laminating machine price pls contact us at hotline: +86-024-24699053