Product Details

APW41037Z-A15-3020BA

Product Description

APW3020BA-A15+B includes 5 main parts:

1. 3000mm × 2000mm working area cutting table;

2. one set of 5-Axis cutting head;

3. 410Mpa intensifier pump;

4. CNC control System (Auto Saving);

5. New Auto Abrasive Delivery System.

We also will send one set of tool and spare parts kit for free.

APW-3020BA Cutting Table

Bridge style waterjet cutting machine is one of the two traditional styles. It has two support points on each side, which makes the machine keep accurate and stable even after a long time process. It is suited to the material with fixed size or the material which is easy to load/unload.
Bridge style cutting machine designed by us is with beautiful appearance and reasonable structure. The motion system and the water tank are separated. That allows the whole system running in a more stable circumstance and easy to transport, maintain and recycle abrasive. The length of this cutting machine can be customized to meet any requirements.

APW3020BA Cutting Table Details : Bridge Style
X and Y axis Travel	3000mm × 2000mm
Z-axis Travel	150mm
Control Accuracy	+/- 0.01mm
Cutting Accuracy	+/- 0.1mm
Servo Motor Specification	0.75KW 1.0KM 1.5KW
X-axis and Y-axis Max.moving speed	12000mm/min
Z-axis Max.moving speed	1000mm/min

Specification
Cutting Head	5-Axis
Way of Drive	AC Servo
Servo System	Yaskawa Servo Motor
Linear guide	SKF(America)
Ball Screw	TBI(Taiwan)
Nozzle and Orifice	America
Atmosphere Pressure	86Kpa ~ 106Kpa
Dust Concentration	Not More than 10mg/m³
X, Y-Axis Structure	Aluminium Structure
Water Tank	Stainless Steel

410Mpa Intensifier Pump

Intensifier is the heart of waterjet. It gives waterjet life. APW A15+B 410Mpa intensifier pump is a miracle and it realizes the dream of every waterjet users whoever used, maintained or researched waterjet.
APW waterjet integrated SIEMENS motor, Jinda hydraulic Pump and hydraulic valves assembly, American A&V Intensifier, American high pressure tube and stainless steel water tank.

APW41037Z-A15+B Intensifier Pump
Max discharge of oil pump	90L/min
Max water discharge	3.7L/min
Max available orifice diameter	0.3mm
Max pressure	410Mpa
Continuous working pressure	340 ~ 360Mpa
Main motor power	37KW(50HP)
Power supply	380V/50HZ/3PH
Max.oil pressure	20Mpa
Length/width/height	1745/1045/1350
Weight	1200kg

Specification
Intensifier	A&V(USA)	Main Motor	Siemens
Hydraulic pump	Jinda Hydraulic	PLC	Omron
Heat Exchanger	Water/Oil panel cooler	Control System	LP/HP auto control
Temperature Display	Digital Temperature Display	Shock Absorber	Four corners of the motor
Directional Valve	Taiwan YUKEN	Accumulator Volume	1L
Oil level and oil temperature sensor	Standard Components	Cutting Water Inlet Pressure	0.3Mpa
Cooling Water Inlet Pressure	0.3Mpa	High Pressure Outlet Connections	M16 × 1.5
Low Pressure Filter	10um

CNC Auto Saving Controller Software

Our company's waterjet using ECS made in Italy waterjet software to control 3-axis, 4-axis, 5-axis waterjet.
PC requirement:
Support Windows 8.1;

CPU: Quad core (Intel);
RAM: DDR3L 4GB;
Hard disk: SSD mSATA 32GB;

Main Characteristics of CNC System

15 Inch LCD Monitor

To choose the basic profile where to operate

To set of the start and stop points and their parameters

To apply a series of attributes to the selected profile (changes of scale, mirror image, rotation)

To repeat the selected profile until a plate of set dimensions has been completed or on a matrix with a defined number of lines and columns

To graphically simulate the programmed operation

To save the operation and to call it back later; the selection is provided by a graphic help

To automatically select the preset operation or to call it back and to immediately carry it out

New Auto Abrasive Delivery System

With the new design, the new auto abrasive delivery system allows operator to add abrasive even during the machine working. It avoids to stop working for adding abrasive, which largely increases the working efficiency and reduces the energy consumption during operation.

New Auto Abrasive Delivery System
Max.Inlet Air Pressure	0.6Mpa
Min.Inlet Air Pressure	0.2Mpa
Abrasive Capacity	250Kg
Min.Inlet Air Flow	0.028 m³/min
Operating Air Flow	0.005 m³/min
Self-feeding Control
Air Valve to prevent jams and breakages
Self sealing
No need to stop the machine during abrasive filling

Certifications

Customize & Service

APW leading waterjet manufacturer of waterjet cutting machine owns an important and the largest manufacturing base of ultra-high pressure waterjet industry in China. We provide high quality products and service. Custom waterjet service at APW will help you rather than let you fit them.

High-Tech Options

AC 5-Axis
A axis Max.Cutting Angle	+/-45°
C axis Max.Cutting Angle	Auto 360°
Control Software	Lantek 3D Software as post processor
Cutting Accuracy	+/-0.1mm ~ +/-0.2mm

A/C 5-axis 3D cutting head: X, Y, Z, A, C. A-axis is the tilting axis; C-axis is the rotation axis.A/C 5-axis 3D cutting head is designed for 3-D cutting application. The cutting head is able to cut 3-D drawings with max. cutting angle upto ±45 degrees.The machine integreted Lantek 3-D software as post processor.

Packing & Delivery

waterjet cutting machine will be packed by Soft package in container by FCL.

Packaging Details: waterjet is soft packing;
Delivery Detail: time of delivery is 20 working days after receipt of deposit.