Intensifier pump

Max water pressure:410 mpa

continuous working pressure:360-380Mpa

Max. oil pressure:20Mpa

Motor power:37KW/50HP

Cutting water inlet pressure:0.3Mpa

Cooling water inlet pressure:0.3Mpa

Power supply:380V/50HZ/3PH

Max. flow rate: 0.3Mpa
Cooling water inlet pressure: 0.3Mpa
Power supply: 380V/50HZ/3PH
Max. flow rate: 3.7L/Min
Oil tank volum: 30Gal.(114L)
Cutting Table

Structural style: Cantilever style
Cutting area: 3000x2000x150mm
Max. moving speed for X/Y-axis :6000mm/min
Max. moving speed for Z-axis: 1000mm/min
Load bearing: 500kg/ Squre meter
Control accuracy: 0.01mm
Cutting accuracy: 0.1mm
Power supply: 220V
Way of drive: AC Servo 
X/Y-axis structure: Aluminum structure

Cutting Head

Mode:3-axis
Max. orifice diameter: 0.33mm
Max. nozzle diameter: 1.02mm
Z-axis step motor: 0.9N.M

CNC Controller

15 inch LCD monitor
Support DXF and NC code file
Software: Windows XP
Resistance of the shoch and electro-magnetic
The key function
Forward & backward processing function 
Even pace control function
Small arcs speed auto processing function
Circle processing function
Partial and smooth processing modes
Abrasive Feeder
Max. inlet air pressure: 0.6Mpa
Min. inlet air flow: 0.028m3/min
Abrasive capacity: 225KG
Features: Air valve to prevent jams and breakages
Self sealing 
Auto control with CNC auxiliary function
Slightly adjust the flow  
  

Dual-Core Waterjet Debut

APW pioneered “Dual-Core” waterjet, which integrated SIEMENS motor, imported REXROTH hydraulic pump and hydraulic valves assembly, American A&V intensifier, American high pressure tube and stainless steel water tank. This dual intensifiers design (for waterjet ceramic tile cutting machine ) represents another landmark in APW history.

They has been widely used in all APW waterjet series. UP to now, APW is still the only waterjet manufacturer holding this advanced technology in China.

Imported components 

We adopt the imported component of CNC waterjet cutting machine like Rexroth hydraulic pump; USA intensifier; Siemens motor;Omron PLC; Yaskawa servo drive; Yuken direction control valves etc. The whole parts of Intensifier are assembled in USA (not just some parts), most of the smaller parts are also imported from USA to ensure its good stability during cutting, durability and long working service life.

Water jet cutting machine have got the consistant high praise from the customer at home and abroad during the 14 years development, there are many successful stories related to APW cnc water jet cutter, we are looking forward to seeing you in our picture wall.

1. What are the benefits of purchasing a water jet cutting machine comparing plasma or a laser ?
Versatility
Water jet cutting machine can cut almost anything – from metal to stone to glass to composites to ceramic.
Laser and plasma cut with heat, and so can only cut materials that have the right thermal properties. Metal is almost always the target material in industry for these heat-based processes. And mild steel is almost always the metal that is cut by them. In addition, plasma can only cut things that are electrically conductive. To optimize laser and plasma cutting, change to gasses is required. No change to water jet parameters, except speed, is usually required for any material.
Thickness
Water jet cutting machine can cut very thin and up to 150mm (sometimes more) of any metal, glass, stone, composite, etc.
Laser cuts very thin and up to 20mm.
Plasma cuts from about 25mm up to 30mm.
Edge finish
Nothing cut by a plasma or laser will be as high of quality of an edge as a water jet cutting machine. We leave behind a smooth edge. No heat affected zones or mechanical stresses are introduced. The plasma and laser cut with heat (we cut with supersonic erosion). Plasma and laser therefore will leave behind a heat affected zones, mechanical stresses, and especially with plasma, dross 'drips' on the edge.
Please contact us for more information of our water jet cutting machine.
2. What kind of material does your water jet cutting machine can cut?
There are plenty materials our water jet cutting machine can cut, such as metal stone glass foam plastic rubber, ect.
4-axis was professionally designed for mable pattern and medallion.
5-axis was professionally designed for 3D materials.

3. What's your water jet cutting machine's max.cutting thickness?
The max.cutting thickness of our water jet cutting machine depends on the materials you cut .
Generally speaking, the thickness of our water jet cutting machine can be up to 150mm, virtually Z constraint is the only limit to thickness.

4. How much training is required to learn how to run a waterjet system?
An operator with no experience should be able to learn how to operate and maintain a waterjet cutting machine with as little as one weel of training. New CAD/CAM nesting software offered by APW make it possible for an operator with no programming experience to program the machine with only a few hours of training.

More information about APW water jet cutting machine price pls contact us at hotline: +86-024-24699053