Product Details

Water jet cutting machine are the most flexible and cost-effective cutting machine available. As the leader provier of waterjet cutting machine, APW's objective was to harness state-of-the-art technologies to make high-pressure abrasive jet machining practical, affordable, and easy to use.

Application

Water jet cutting machine can cut almost any material. Pure water jets can quickly and accurately cut soft materials such as rubber, foam and other gasket material. Abrasive water jets can cut almost any other material over a very wide range of thichness:

The features Jet cutting machine

1 It does not cause heat effect or detormation or tiny cracks
2 It can cut any complex and flat figures
3 Narrow kerfs
4 Smooth incision
5 Minimize dust and toxic fumes, provice healthier working environment
6 It can be adjested easily and quickly by the designs and materials
7 Low processing cost in unit time
8 Components are of high quality and spare parts are cheap
9 Drilling holes to avoid water permeate the composite materials
10 Reduce setting time and fixture cost

The cutting speed for water jet cutting machine

The cutting speed of water jet cutting machine varies depending on the material, thickness, desired cut quality, water pressure and the machine itself configuration. Generally for APW waterjet, you could find the following speed just for your reference.

Material	Thickness(mm)	Cutting speed of 300Mpa pump(mm/min)	Cutting speed of 380Mpa pump(mm/min)
Marble	20	300	380
Marble	30	200	300
Granite	20	250	330
Granite	30	150	200
Glass Brick	12	800	960
Glass	5	1200	1500
	10	500	600
	20	350	420
Glue Chipped Glass	10	450	540
Sponge	50	5000	6000
Foam	50	5000	6000
Wood	10	1000	1200
Wood	50	200	240
Steel	2	600	720
	4	400	500
	6	300	420
	8	200	300
	10	120	200
	15	75	120
	20	30	50
	60	12	20
Laminates	10	1500	1800
Aluminum	5	350	500
Copper	5	350	420
Glass Fiber Reinforced Plastic	2	1200	1500

Product Description

Water jet cutting machine is made up of several critical key componnents, such as intensifier pump; cutting table with cutting head; CNC controller; auto abrasive delivery system.

Dual-Core Waterjet Debut

The new APW "Dual-Core" pump of water jet cutting machine is equipped with dual intensifiers imported from the USA. The two intensifiers are able to work by alternative way. It significantly reduces the maintenance time, and expands the life span of the pump.

Imported components

We adopt the imported component of water jet cutting machine like Rexroth hydraulic pump; USA intensifier; Siemens motor;Omron PLC; Yaskawa servo drive; Yuken direction control valves etc. The whole parts of Intensifier are assembled in USA (not just some parts), most of the smaller parts are also imported from USA to ensure its good stability during cutting, durability and long working service life.

Our Customers

Water jet cutting machine have got the consistant high praise from the customer at home and abroad during the 14 years development, there are many successful stories related to APW cnc water jet cutter, we are looking forward to seeing you in our picture wall.

FAQ

1. What are the benefits of purchasing a water jet cutting machine comparing plasma or a laser ?

Versatility
Water jet cutting machine can cut almost anything – from metal to stone to glass to composites to ceramic.
Laser and plasma cut with heat, and so can only cut materials that have the right thermal properties. Metal is almost always the target material in industry for these heat-based processes. And mild steel is almost always the metal that is cut by them. In addition, plasma can only cut things that are electrically conductive. To optimize laser and plasma cutting, change to gasses is required. No change to water jet cutting machine parameters, except speed, is usually required for any material.
Thickness
Water jet cutting machine can cut very thin and up to 150mm (sometimes more) of any metal, glass, stone, composite, etc.
Laser cuts very thin and up to 20mm.
Plasma cuts from about 25mm up to 30mm.
Edge finish
Nothing cut by a plasma or laser will be as high of quality of an edge as a water jet cutting machine. We leave behind a smooth edge. No heat affected zones or mechanical stresses are introduced. The plasma and laser cut with heat (we cut with supersonic erosion). Plasma and laser therefore will leave behind a heat affected zones, mechanical stresses, and especially with plasma, dross 'drips' on the edge.

Please contact us for more information of our water jet cutting machine.

2. What kind of material does your water jet cutting machine can cut?

There are plenty materials our water jet cutting machine can cut, such as metal stone glass foam plastic rubber ect.
4-axis was professionally designed for mable pattern and medallion.
5-axis was professionally designed for 3D materials.

3. What's your water jet cutting machine's max.cutting thickness?

The max.cutting thickness of our water jet cutting machine depends on the materials you cut .
Generally speaking, the thickness of our water jet cutting machine can be up to 150mm, virtually Z constraint is the only limit to thickness.

4. How much training is required to learn how to run a waterjet system?
An operator with no experience should be able to learn how to operate and maintain a waterjet cutting machine with as little as one weel of training. New CAD/CAM nesting software offered by APW make it possible for an operator with no programming experience to program the machine with only a few hours of training.

More information about APW water jet cutting machine price pls contact us at hotline: +86-024-24699053