ST02 Silicone Sealant Extruder Machine for Insulating Glass/ Thiokol Extruder Machine-MS AWEN
Functions and Features:
1.It is composed of raw material pump,solidification pharmaceutical pump,proportional pump, sealant-mixture system,hydraulic pressure system,electric system and so on.
2.Raw material pump,solidification pharmaceutical pump and proportional pump adopt the special high-pressure filling pump and the materials can be supported equivalently in two-way.The raw material pump is compelled by the hydraulic pressure sysem while the solidification pharmaceutical pump is compelled by the pheumatic motor.
3.There are high-pressure valves in the underpart entrance of solidification
pharmaceutitcal filter and material-feeding place of the mixing device and one-way valve is set in the mixing device so as to prevent two-components from fleeing each other.
4.Rising and falling system is controlled by hand valve and the proportion of the two-components can be changed by adjusting the slipper in the swinging pole.Tighening the nut once the demanding scale is reached.
4.Rising and falling system is controlled by hand valve and the proportion of the two-components can be changed by adjusting the slipper in the swinging pole.Tighening the nut once the demanding scale is reached.
Technical Parameter:
Mixing ration proportion of mixture: 6:1-14:1
Raw material barrel: 55Gallon(200L)
Mixing ration proportion of mixture: 6:1-14:1
Raw material barrel: 55Gallon(200L)
Solidification pharmaceutical barrel: 5Gallon(20L)
Max.air-consumption volume: 0.5m3/min
Max.air-consumption volume: 0.5m3/min
Max.squeeze pressure: 20Mpa
Air source presure: 0.5-0.8Mpa
Air source presure: 0.5-0.8Mpa
If any question about our machines, pls feel free to contact with me.
Ms Awen Yin
Tel./fax: 0086-0531-66683398
Mob: 0086-15063343341
Jinan Sunny Machinery Co.,Ltd.