Stone Powder Making Machine
five models: HGM80, HGM90, HGM100, HGM100A, and HGM125
finished production fineness: 300meshes~3000meshes, 5-47 micron
the capacity (ton/hour) ranges from 0.4T/H to 12T/H
Introduction of Stone Powder Making Machine
Stone Powder Making Machine is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.
Features of Stone Powder Making Machine
High Efficiency
Under the same finished final size and the same motor power, the capacity of Soap Stone Powder Making Machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.
High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
High fineness, flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.
Environment-friendly
The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
Advanced intelligent speed control device
Convenient adjusting, more uniform particle size.
Main specification of Stone Powder Making Machine
Model | HGM80 | HGM90 | HGM100 | HGM125 | HGM1680 |
Ring Diameter(mm) | 800 | 900 | 1000 | 1250 | 1680 |
Ring Number(layer) | 3 | 3 | 4 | 4 | 4 |
Roller Number (piece) | 18-21 | 24-29 | 28-36 | 30-40 | 30-44 |
Main Shaft Speed (r.p.m.) | 230-240 | 200-220 | 180-200 | 135-155 | 123-130 |
Input Size(mm) | ≤20 | ||||
Finished Size (μm/mesh) | 74-5 (200-2500) | 74-5 (200-2500) | 74-5 (200-2500) | 100-6 (150-2000) | 100-9 (150-1500) |
Capacity (t/h) | 0.5-4.5 | 0.6-6.5 | 1-9 | 2.8-20 | 5-45 |
Overall Dimension (L*W*H, m) | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 14*9*10.25 | 26.3*7.5*11.9 |
Motor Power(KW) | 154-175 | 175-205 | 285 | 396-461 | 669.5-701 |