【Product introduction】
PTT-034 is a photocurable transparent conductive coating mainly used for PC, PMMA, PVR and other surfaces. The coating hardness can reach 5H, the surface resistance is 103-104Ω/□, wear resistance, good transparency, good resistance and safety. Reliable, the resistance is not affected by humidity and temperature, not afraid of water, alcohol or other organic solvent scrubbing, the coating is bright and crystal clear, no flaws, no spots, shrinkage holes, etc., the coating has a long service life and is permanently effective.
[Features]
Main components: polymer conductive polymer and acrylic resin
A, B two-component coating
PH value: 6±0.5
Specific gravity: 0.98g/cm3
Transparency VLT: 75 to 80%
Surface resistance: 103 ~ 104 Ω / □
Surface hardness: 750g Japanese Mitsubishi test, PC board pencil hardness H; PMMA board surface pencil hardness 5H
Main solvent: PMA
[Coating method]
It can be applied by screen printing, gravure printing, shower coating, blade coating, dip coating or the like.
【Steps for usage】
In the first step, 40% of the A component and 60% of the B component are poured into the container and stirred uniformly.
In the second step, the coating forms a coating.
In the third step, the solvent is volatilized by drying at 55 to 65 ° C for 30 to 60 seconds.
The fourth step is UV curing, and the excitation energy is 30mj.
The fifth step is to trim the film.
【Applications】
PC, PMMA, PVR, PET and other surfaces.
[Package Specifications]
1/2/20L