Injera Baking Production Line Spring Roll Making Machine Commercial 500mmdia Heating Cylinder
Negotiable /Set
Min.Order:1 Set
Henan Gelgoog Machinery CO,LTD
Features:
1. Non stick baking pan: easy to release, low reject rate, no need for cooking oil, and low production cost.
2. Food is not dark and greasy.
3. Electric heating: this kind of heating needs three phase electricity. The temperature controller automatically controls the temperature. The temperature control is accurate and the error is small.
4. Gas heating: It is suitable for liquefied petroleum gas or natural gas. This heating method has lower cost, but it needs to manually adjust the gas valve to control the temperature.
5. Injera Making Machine is fast heating, high efficiency, good shape.
6. The operation method of the machine is very simple, it is a very easy machine to use, and the use of spring roll leather machine to produce spring roll skin can help us save more costs and improve the production of spring roll skin.
7. Vertical design, easy to operate, economical and practical. The standard of spring rolls is 20-50cm, and it can also be customized according to your needs.
The Injera Making Machine quality clearance machine is stainless steel 304 design, to meet your processing requirements, food contact parts are in line with safety and health standards. The machine processes and produces speed blocks, and the price is reasonable and even. The finished product has good taste, good taste, uniform thickness and uniform size, and won your trust and recognition.
Several suggestions and precautions:
1. In the process of production, if the pulp is broken due to the blockage of the slurry nozzle, the slurry nozzle should be cleaned in time.
2. If one side of spring roll is short of slurry, besides the factor of eccentric wheel, it should also consider whether the ground is uneven, which causes the machine to tilt slightly to the other side.
3., When making pulp, there must be enough time to wake up the pulp so as to ensure that there is no gluten in the pulp.
4. After the operation of the machine, the bucket and gear pump should be cleaned with clean water to prevent the use of the machine from being affected by the drying of the paste.
5. When making, try to ensure the tightness of the operating environment, so as to prevent quickening the loss of water.
6. Grind the baking wheel with fine sandpaper before sizing and wipe the oil on the surface of the baking wheel.
7. The spring rolls should be kept as warm boxes or sealed bags as soon as possible.
8. When the machine is not in use for a long time, polish the baking wheel and cover the edible oil and cover it with plastic wrap.
Parameter:
Model | GG-3620 | GG-5029 | GG-8045 |
Dia. of heating Cylinder | 360mm | 500mm | 800mm |
Size of machine | 4.3*0.8*1.35 | 4.7*0.95*1.58m | 5.2*1*1.5m( |
Electric Power | 6.0kw or gas | 13.2KW or gas | 38kw or gas |
Host Power | 0.75KW | 0.75KW | 0.75KW |
Power Cutter | 0.55KW | 0.55KW | 0.55KW |
Belt Power | 0.55KW | 0.55KW | 0.55KW |
N. W. | 320kg | 800kg | 1000Kg |
Size of the sheet ( Max.) | Round dia: 180mm Rectangular:200mm | Round dia:280mm Rectangular:290mm | Round dia:430mm Rectangular:450mm |
Thickness of the sheet | 0.3-2.0mm | 0.3-2.0 mm | 0.3-2.0 mm |
Production capacity | 800pcs/h | 1500-2000pcs/h | 4000pcs/h |
Model | GG-12060 | GG-12060-II |
Dia. of heating Cylinder | 1200mm | 1200 |
Size of machine | 6.2*1.15*2.0m | 6.2*2.4*2.5m |
Electric Power | 59kw or gas | 100KW or gas |
Host Power | 0.75KW | 0.75KW |
Power Cutter | 0.55KW | 1.1KW |
Belt Power | 0.55KW | 1.1KW |
N. W. | 1200kg | 2500kg |
Size of the sheet ( Max.) | Round dia: 500mm Rectangula:520mm | Round dia:500mm Rectangula:520mm |
Thickness of the sheet | 0.3-2.0mm | 0.3-2.0 mm |
Production capacity | 14000pcs/h | 28000pcs/h |
Description:
Put the prepared pulp into the barrel, when the baking wheel is heated to 160 C, start the pulp pump to deliver the pulp to the nozzle, operate the clutch lever, so that the pulp adheres to the arc surface of the baking wheel. When the baking wheel rotates over 270-300 degrees, the pulp matures and automatically separates from the baking wheel to form a fixed thickness spring roll skin.
The Injera Making Machine can produce a round spring roll with a thickness of 0.3mm-0.8mm and a size of 20-50cm. According to user needs, we need to customize the round spring roll machine with different sizes and output. Adopt advanced temperature control system, make temperature zero error, no heat waste, achieve the purpose of energy saving, lower production cost, simple operating system, one person can operate, greatly saving labor.
It is composed of frame, pneumatic element, electrical element, heating element and moulding abrasive tool. The machine can set heating temperature and time according to need, complete pressing and heating work within a set time, and change the mould to press different thickness and shape of cake according to the processing requirements.
The Injera Making Machine is made of mould, and its appearance is beautiful and clean. The heating part has just taken the form of large area full enclosed, with high thermal efficiency; in the aspect of temperature control, a full digital temperature controller is adopted, all components are connected by plugs and interchangeable, so as to make its performance more stable and maintenance more convenient. Spring roll leather machine is widely used in organs, factories, mines, schools, restaurants, sugar processing departments and individual restaurants, branding all kinds of noodles.