BRIEF INTRODUCTION

DLX-PFS08G series 10/100M/1000M  Ethernet Fiber Switch is included two 1000M SFP fiber optical port and eight POE 10/100M/1000M  Ethernet ports. It has the function of photoelectricity switchover between 8channels 10/100M/1000M  Ethernet ports and 1000M optical port. Adopts single port full-power technology, and single port supports Max.30W and feeds enough power to Array IR CCTV cameras.  Auto-detect and recognize IEEE 802.3AF/IEEE 802.3AT standard PD(Powered Devices) and feeds power to it. Supports smart power management, if the power of PD over 53W, the system will stop feeds low-priority devices. Has smart POE auto-recognized system to protect devices from overflow current and over -voltage etc. Adopts Auto-standby mode and cable distance detection management to ensure the switch has excellent energy saving capability. Using imported original industrial components and Gold-plated PCB. All RJ45 ports adopt advanced Self-healing multi-stage lightning protection design, have high-level lightning, surge and ESD protection.  

APPLICATIONS

●    High-definition IP video surveillance and power supply

●    High Way& Road surveillance system, Capture system

●    Video-surveillance system of large factories and mines systems

●    IP Network Multi-function system

●    High Way & Toll Station Surveillance

●    Public Security Surveillance

●    Surveillance and cable TV system

●    Intelligent traffic monitoring system

●    High Quality Video Conference

●    Broadcast and TV program transmission

●    Long-distance multimedia teaching

●    Industrial Closed Circuit Television Surveillance

FEATURES

●    Adopts import industry PSE chip and Taiwan YDS transformer

●    Single port full-power technology, and single port supports Max.30W

●    Supports IEEE802.3AF and IEEE802.3AT protocol, Auto-detect and recognize IEEE 802.3AF/IEEE 802.3AT standard PD(Powered Devices) and feeds power to it

●    Supports smart power management, if the power of PD over 53W, the system will stop feeds low-priority devices

●    Supports Auto-standby mode and cable distance detection management, if no devices been connected, then auto-standby to save energy, if cable distance less than 10meters,then will use Lower transmission power

●    Smart POE auto-recognized system to protect devices from overflow current and over -voltage etc.

●    2K MAC address

●    1/2/3/6 lines or 4/5/7/8 lines power supply optional, supports all PD devices

●    Anti-lightning and ESD protection  for all Ethernet ports, power ports. 

●    Immersion gold PCB board, Industry grade components

●    Multi-services Flexible Configuration on the Same Platform

●    Auto-negotiate to NIC/HUB and MDI/MDI-X

●    Support VLAN Network isolation and BSTM broadcast storm-control setting

●    Indicators for Power Supply, Ethernet etc.

●    Supports line speed switching of all ports and in 64~1536 frame length can reach line speed 

●    Standard: Full-duplex adopts IEEE 802.3x standard, Half-duplex adopts Back pressure standard

●    Wall mounted installation

●    Transmission distance: 2km(multi-mode),20km,40km,60km,80KM,100km,120km optional(Single-mode)

SPECIFICATIONS