Categories:

l  Internal pressure module hydraulic automatic pressure calibration stand

l  External pressure module hydraulic automatic pressure calibration stand

l  Bench pressure module hydraulic automatic pressure calibration stand

Applications:

1. pressure test automatically.

2. maintenance and service facilities.

Specification:

l  Model: CWY1006C/D, CWY1060C/D

l  Measuring range: (-0.1-2.5)MPa, (-10-10)kPa, (0-60)MPa

l  Pressure accuracy: 0.02% F.S or 0.05% F.S

l  Current accuracy:  0.02% or 0.05%

l  Pressure control accuracy:±5

l  Standard evaluated point: 0%, 25%, 50%, 75%, 100%, automatic return. It can be arbitrarily set connected with computer.

l  Customized verification point: any point.

l  Verification point automatic stabilization time: 20s, adjustable within (10 ~ 240)s

l  Current input: (1 ~ 2) input, (0 ~ 22) mA

l  Switch input: dry contact, it can detect contact resistances.

l  Loop power supply: DC24V/30mA, which does not damage the standard gauge if it is incorrectly connected.

l  Power supply: 220V/50Hz

l  Standard evaluated point: 0%, 25%, 50%, 75%, 100%, automatic return. It can be arbitrarily set connected with computer.  Customized verification point: any point.

l  Verification point automatic stabilization time: 20s, adjustable within (10 ~ 240)s

l  Overall time of the transmitter automatic verification ( steady after 9 points ): about 5 minutes

l  Internal pressure module measuring range:（3～60）MPa

l  Customized verification range:intervals within （3～60）MPa

l  Units:MPa

l  Display precision: 5 digits

l  Pressure interface: M20*1.5 female thread quick connector

l  Current/voltage interface: Φ 4 standard banana plug

l  Sewage outlet: inner diameter : Φ 6 mm

l  Weight: 19kg

l  Dimension: 530（L）*300（W）*300（H）mm

Features:

l  Medium: transformer oil or purified water. For verification, no external pressure source is required, no air exhaust is required .

l  Pressure switch verification time: about 2 minutes.

l  HART function

l  Security protection: overpressure, overcurrent, sensor failure, etc

l  Automatic verification software: optional

l  External standard gauge connection