Embedded RF antenna 698-2700mhz 2G 3G 4G LTE full band GSM GPRS antenna PCB Internal Antenna With RG1.13mm cable and connector for GPS Tracker / Wifi / Mobile with free RF antenna design

This 4G LTE full band PCB internal antenna is supplied by C&T RF Antennas Inc.

The PCB trace length will determine the resonant frequency; the higher the frequency the shorter the trace.  Each antenna requires a keep out area on the PCB.  This is defined as an area around the antenna trace where no copper traces or ground fill can be used on any layer of the PCB.  Wider traces are often better, as they typically give a wider bandwidth.  The trace can either be gold flashed or covered with solder mask.  The antenna’s electrical performance will be determined by the substrate material used, its thickness, and dielectric constant (εR).  

This 4G LTE antenna is an ideal solution for 4G LTE and cellular applications including wireless routers, telemetry and telematics application where 4G LTE, cellular, GSM and 3G capability is required.

Embedded LTE 4G Antenna Specifications:                        

General Frequency: 698-2700MHz
Antenna Type: Internal antenna
Gain: 5 dBi
Horizontal Beamwidth: 360
Vertical Beamwidth: 75
Number of Ports/Leads/Pigtails: 4G LTE Full Band
Connector: U.FL connector
Application: Indoor
Mounting Style: Device Direct

VSWR: <= 1.5

Input impedance: 50 Ω

Maximum power: 20W

Welcome to send your BOM list for our quotation.

Key Specifications/Special Features:

Features:

Good appearance

Durable, corrosion resistance

Full day for working, waterproof

Optimized dimensions

High gain, lower VSWR, strongly anti-interference

All antennas of The C&T RF Antennas Inc are available of with a choice of SMA, TNC, N, BNC or FME connectors. Further individual connectors are available on application.

Tag: 4G LTE antenna, LTE 4G antenna, embedded 4g PCB antenna,