Pneumatic Hydraulic Electrical Slip Ring Connector Union Rotary Joint, Multi 2 4 6 passages High Speed 3000RPM
Feature:
1. It can transmit compressed air or other special gases to meet the functional requirements.
2. Hydraulic power can be transmitted, which can be selected from 0.8mpa-20mpa.
3. The speed can be selected from 10rpm to 500rpm to meet the requirements of various devices.
4. The number of electric slip ring channels can be selected from 2-96, while the hydraulic rotary joint (pneumatic rotary joint) can be selected from 1-36.
5. Small current, power current or various data signals that can be transmitted to any rotating body.
Quick Details:
Material: Aluminum | Technics: | Type: Coupling |
Place of Origin: Shenzhen, China | Model Number: JSR-MQR6-M5 | Brand name: JARCH |
Connection: M5 Screw | Shape: round | Head Code: round |
Size: M5 | Medium: compressed air | Rotor material: Aluminum |
Max speed: 3000RPM | Max pressure: 0.8Mpa | Max temperature: 80℃ |
Description:
The electrical rotating joint is an 18-way signal developed by jiatchi electromechanical co., LTD. For customers.The cyclone head is divided into 8 compressed-air channels with a diameter of 4mm
A rotary joint, also referred to as a rotary joint or rotating joint, provides a mechanical seal between a stationary supply pipe and a rotating drum or cylinder to permit the flow of heat transfer media into and/or out of the rotating roll. Heat transfer media typically used with rotary joints and rotating joints includesteam,water,hermal oil,coolant,airhydraulic oil.
MG series rotary joint consists of two large precision bearings and seals principles of design using smooth, sealed bearing and wear to a minimum, extend the service life.
JARCH’s high-speed rotary unions are capable of containing very high pressure while rotating at high speeds. The materials used in the making of the high-speed rotary unions are aluminum, carbon steel, and, upon request, stainless steel, which provides outstanding corrosive resistance. We offer a variety of sizes in both American and Metric. We specialize in custom design that provides our customers with the exact specifications that they require. Speak to our knowledgeable and personable sales staff and they will be happy to assist in the creation of the prototype that will meet your needs.
Typical industrial uses for JARCH’s high-speed rotary unions include steam dryers, rubber mills, extruders, calendar rolls, air clutches, laminators, press rolls, manufacturing of machines, hydraulics, Machining Centers and related applications.
Benefits:
1.Standard products, may replace completely SMC MQR series products,the size is the same.
2.It is metal sealed structure, low torque.
3. Its speed is up to 200-3000 rpm
4.Long lifetime,it is up to 50 million revolutions.
Dimensions:
Applications:
• Auto Machine
•Robot
•Dyeing, Rubber, Plastics, Chemical,Machine tool
Installation Instructions:
Your Rotary Systems rotary union is a precision component which, when installed properly, will provide a long, leak free life. Please follow these general guidelines when installing your union:
Connections
Rotary Systems unions should always be installed using flexible connections. To avoid damage to the bearings, the union needs to find its center during operation. It is imperative that either the shaft or the housing is not hard-piped.
The housing of the union should be held in a vise and the flexible connection should be installed before installing the union to the machine.
Clean female threads and face of shaft prior to installation. Use Teflon pipe tape or pipe sealant on NPT threads. As a guideline, NPT threads should be hand tight plus 1- 3 turns to seal the threads. When installing parallel threads, appropriate gaskets or o-rings should be used.
There should be a slight, kink-free curve in the hose when installed on the equipment. It is essential the housing or shaft is allowed to float to compensate for any eccentricities and/or misalignment.
Anti-rotation
In many instances, the flexible hose connections are used for anti-rotation. Other applications require an external device for anti-rotation such as a fork around the fittings, pin, yoke or bracket. Anti-rotation devices need to “float” to prevent damage to the union.
Filtration
To prevent damage to the shaft or the seals, Rotary Systems requires filtration to 10 microns or less. Failure to do so may invalidate your warranty and cause premature failure.
Lubrication
If your union has grease fittings, lubricate union with no more than two pumps of appropriate grease per fitting.
Jarch main products:
1. Fiber optic rotary joint series
2. Through bore slip ring series
3. Electro optical slip ring series
4. Hybrid slip ring series
5. Pneumatic rotary joint series
6. Hydraulic rotary union series
7. Capsule slip ring series
8. Pancake slip ring series
9. High current slip ring seriels
10.High speed slip ring series
11.Thermocouple slip ring series
12.Miniature slip ring series
13.Wind turbine slip ring series
14.Ethernet slip ring series
15.Explosion proof slip ring series
16.Mercury slip ring series
FAQ
Q1: Are you a factory or a trading company? | ||||||||||
A: We are a professional manufactory with High-level R & D team. | ||||||||||
Q2: How many types of the slip rings do you have? | ||||||||||
A: We can supply all kinds of the slip rings.Such as minitary slip ring,customized sliring, miniature slip ring,fiber optical slip ring,RF rotary joint,HD combined-type, disc slip ring,wind power slip ring,solar power slip ring,through-bore slip ring, etc. | ||||||||||
Q3: Can you supply the slip rings with high frequency signals and(or) optical communication signals. | ||||||||||
A: Yes, we can supply mixed signals slip rings as your request. | ||||||||||
Q4: what's the working life of your slip rings. | ||||||||||
A: 30~50 millions revolutions for standard ones, 50~80 millions revolutions for special ones, We also can supply much higher revolutions as your special requirement. | ||||||||||
Q5: Do you supply OEM and ODM ? | ||||||||||
A: Yes, we supply OEM and ODM. | ||||||||||
Q6: What technical data should be provided for our customized slip ring model. | ||||||||||
A: If you want to costomize the special slip ring model, you need provide details as below: a.operatring speed(RPM) c.outline size d.channels(the No. of single wire besides cable) f.the signal type and related g.operating temperature h.IP(sealing requirements) | ||||||||||
Q7: How long is your production lead time? | ||||||||||
A: It needs 7 to 15 days for standard products, 10 to 20 days for simple customized products, 15 to 40 days for complex customized porducts. | ||||||||||
Q8: What's your delivery port? | ||||||||||
A: Our delivery port is Shenzhen | ||||||||||
Q9: How do you delivery our goods? | ||||||||||
A: Usually small orders can be deliveried by air, big orders can be deliveried by sea. It can be negotiated before delivering. | ||||||||||
Remark: | ||||||||||
If you have any questions, pls contact us without any hesitation.