Product Details

Toilet paper rewinder

Toilet paper rewinder, napkins folding machine, paper cutter separator

1. Fully automatic paper tube replacement device, no need to wear paper tube manually, automatically send out the finished product after rewinding, immediately reset rewinding, can adjust any specifications of paper tube in 1 minute.

2. Auto-delivery system after rewinding and forming. The patented technology of mechanical arm pushing can smoothly deliver the finished product, and the minimum diameter of the finished product is 60 mm.

3. Automatic trimming, glue spraying and sealing are completed at the same time. This device replaces the traditional waterline trimming and realizes the prevailing trimming and tailing technology abroad. The finished product has a paper tail of 10-18 mm, which is easy to start, reduces the loss of paper tail when making the common rewinding machine and reduces the cost of the product.

4. Adopting advanced PLC programming technology, the finished product can realize tightening first, then loosening multi-level and different tightness in the rewinding process, and solve the problem of loose core of the finished product due to long-term storage.

Raw paper monitoring system, in the process of high-speed operation of the real-time monitoring of raw paper to ensure the normal operation of equipment;

6. Coreless roll forming and rewinding system has changed the traditional process of core pulling and rewinding to achieve solid effect, reduce the artificial products and make the finished products more beautiful.

7 high precision spiral soft knife, 4 knife drilling noise is low, drilling clearer, gearbox adjustment range is larger

3-layer horizontal stripper rack, pneumatic feeding, pneumatic wide belt feeding, each roll of base paper has an independent tension adjusting device

9 embossing device, using point-to-point double-sided embossing system, so that the product has the same double-sided effect, soft handle, clear and beautiful patterns, compared with the same specifications, the weight of finished products will be reduced by more than 40%.

Using the front and rear electric switch to pull the base paper, the operation is simpler and safer.

Main technical parameters

Finished product diameter: 70~140 mm (adjustable)

Core diameter of finished paper core: 20~50 mm

Base paper diameter: less than 1100 mm (other specifications specified)

Base paper core diameter: 3 "(76.2 mm) (specified in other specifications)

Perforated pitch: 90~160mm (optional pneumatic separation)

Speed: 180-200 M / min

Parameter setting: touch-screen multi screen human-machine interface operation system

Programming controller: MITSUBISHI PLC computer programming

Paper tray: 3 layers

Pneumatic system: 3 air compressors, minimum pressure 5kg/cm2 Pa (customer owned)