ST-8617C Cables Insulation Dynamic Cutting through Resistance Tester 

Standards:  According to clause 5.6 of EN 50305, ASTM D 3032 (clause of 22), ES AU51A348 Rev. A

Used range: It is apply to the insulation wall of cables not more than 0.38mm, if the thickness over 0.38mm, please used the machine of ST-8616 Crush Resistance Test Machine.

Technical parameters:

1.       Test force range: 0 N ~500N

2.       Force units: N, kgf, lb

3.       Display: LCD display

4.       Test Speed: 5mm/min or 10mm/min (0-15mm/min can be adjust)

5.       Cutting Edge: diameter is 0.45mm (20pcs)

6.       Test voltage:  12V/DC

7.       Test current: 5mA

8.       Power supply: 220V/AC, 200W

9. When the cutting edge touches the conductor, this tester will stop automatically and show the force value with alarm to reminder