ZJC-R High Efficiency Vacuum Lubricating Oil recycling machine
USD $3 - $8 /Set
Min.Order:1 Set
Chongqing Gold Mechanical&Electrical Equipment Co.,Ltd.
GDKZ-IV High Voltage Circuit Breaker Vacuum Degree Tester Switchgear Vacuity Tester
GD-2305/2306 5kV 10kV High Voltage Insulation Resistance Meter Tester
GD-TC 11kV-35kV Power Cable Fault Locator and Cable Fault Detector
GDYJ-502A Portable Transformer Oil dielectric strength tester for insulating oil BDV testing
GDYJ-501Transformer Insulating Oil BDV and Dielectric Strength Tester
ZJC-R High Efficiency Vacuum Lubricating Oil recycling machine
Product introduction:
ZJC-R High Efficiency Vacuum Lubricating Oil recycling machine is widely used in electric power, chemical engineering, traffic, railway, etc. It is suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil.
This waste oil recycling machine can effectively filter out pollutants and water in the oil through special design of the vacuum separation system and the impurity filtering system. It is the best choice for mining industries to save energy and maintain equipment.
Parameters :
ZJC-R High Efficiency Vacuum Lubricating Oil recycling machine | |||||||
Name | Unit | ZJC0.6KY-R | ZJC1.2KY-R | ZJC1.8KY-R | ZJC3KY-R | ZJC6KY-R | |
Flow | L/H | 600 | 1200 | 1800 | 3000 | 6000 | |
Vacuum Degree | Mpa | -0.07~-0.101 | |||||
Pressure | Mpa | not above 0.6 | |||||
Temperature | ℃ | 45-65 | |||||
Power Supply | V | 380V/50HZ, 3-Phase 4-Wire | |||||
Working Noise | dB(A) | 78 | |||||
Total Power | Kw | 6+1.5 | 9+1.5 | 12+1.5 | 30+3 | 2*30+4.4 | |
Net Weight | Kg | 350 | 420 | 510 | 950 | 1200 |
Package:
Our Services:
1. The warranty period is 12 months.
2. We supply repairing parts for product's life time long and technical instruction.( free within the warranty period and charge beyond warranty period).
3.All our products have been run well and have been adjusted to good state before go to market. Operator only need to do as the instruction manual by pulling the buttons and add right amount of additives. If some parts broken, operator just need to remove bolts and change new. Please note: the operation and repair is very simple.
4. When the machine send to your company . You can arrange your engineer to our company to learn operate the machine . We will arrange our engineer to teach your company engineer to operate the whole machine . You only need to pay your engineer to China the air tickets fee , hotel fee and food , It is ok !
5. We also can arrange our engineer to your country. You need to pay the air tickets fee , hotel fee ,food.