Difference between power station check valves and other valves:
1. Product design and manufacture according to standard E101 and JB/T3595-93 rules, reasonable structure, excellent performance, modeling
2. Valve lumen self-tightening seal structure is adopted and the medium pressure is higher, the sealing performance, the better
(3) For butt welding on both ends of the branch pipe, different to meet the demand of the takeover
4. Disc and seat sealing surface using department too vertical (satellite) cobalt-based hard alloy surfacing and become, wear-resisting, high-temperature resistance, good abrasion resistance, long service life
5. Made of high-quality alloy steel manufacturing, safe and reliable, stable performance, especially suitable for high-temperature and high-pressure pipeline
Power station of check valve installation should pay attention to the following things:
1. Do not make the check valve in the line to bear weight, large check valve shall be independent support, make it not influenced by the pressure caused by the piping
2. When installation, pay attention to the medium flow direction should be consistent with valve body by the ticket direction arrow
3. Vertical elevating disc check valve should be installed in vertical pipe runs
4. Elevating disc check valve should be installed in horizontal pipe runs
Details: H61Y high-pressure power station check standards:
1. Design and manufacture and acceptance by thermal power valve standard ANSIB16.34 API6D GB12236 E101 and JB/T3595, DL/T531 prescribed standards
2. Structure length by E101, JB/T2766, GB/T15188.1 ANSIB16.10 GB12221 standard or according to user requirements
3. Pressure: temperature level by E101, JB/T3595 API598 GB9131 prescribed standards
4. According to the welding groove size GB12224, JB/T3595, ASME B16.25 ANSIB16.25 standard rules or according to the size of the user piping requirements