Product Details

Product Description

Fiber laser cutting machine It can do plane cutting, but also do bevel cutting, and the edge neat, smooth, suitable for high precision metal plate cutting, at the same time with the arm can be three-dimensional cutting instead of the original five Axis laser. Compared with ordinary carbon dioxide laser cutting machine to save space and gas consumption, high photoelectric conversion rate, is a new energy-saving products, but also one of the world's leading technology products.

Laser Source Power/Cutting ability

Laser Source Power/Cutting ability		CS(mm)	SS(mm)	Alumium(mm)	Brass(mm)
500W	Max cutting thickness	8	4	2	2
500W	Max processing thickness	5	3
700W	Max cutting thickness	10	6	3	3
700W	Max processing thickness	6	5
1000W	Max cutting thickness	14	8	4	4
1000W	Max processing thickness	8	6
1500W	Max cutting thickness	16	10	6	5
1500W	Max processing thickness	12	8
2000W	Max cutting thickness	20	12	8	6
2000W	Max processing thickness	16	10
2500W	Max cutting thickness	22	12	10	8
2500W	Max processing thickness	20	10
3000W	Max cutting thickness	25	14	12	8
3000W	Max processing thickness	22	12

GS-LFDS3015 Technical Specifications

Model	GS-LFDS3015
Laser source medium	Fiber
Cutting range (L*W)	3000 mm * 1500 mm
Z axle stroke	250 mm
Max. positioning speed	120 m/min
X, Y axle Max. accelerate speed	1.2 G
Cooling form	water cooling
Laser wavelength	1070nm
Output power of laser source	500w
Min. cutting gap	≤ 0.1 mm
Positioning accuracy of X, Y and Z axles	± 0.03 mm
Repeated positioning accuracy of X, Y and Z axles	±0.01mm
Thickness of cutting material (according to material)	0.2 - 25 mm
Drive model	Imported servo motor
Power requirement	380 V, 50/60 Hz
Working temperature	5 - 45ºC
Continuous working time	24 Hours
Machine weight	About 5850Kgs
Outer dimension	8500 mm * 3800 mm * 2000 mm
Total protection level of power supply	IP54

Fiber Laser Cutting Machine Advantages

Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of cutting pieces can be up to + / - 0.05 mm.
Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can be used as the final working procedure, parts can be even used directly without mechanical processing.
Heat affected zone is very small, material performance is hardly affected near the kerf width , and the workpiece deformation is small. Also, kerf geometry is good , slitting rectangular cross-section shapes appear to be regular.

Cutting Simples

It is used to cut Metal,such as stainless steel, carbon steel, alloy steel, silicon steel, spring steel,galvanize plate, pickled plate, copper plate, aluminum plate, etc.We are honored to offer you samples. New clients are expected to pay for the courier cost, the samples are free for you, this charge will be deducted from the payment for formal order.

Packing pictures of the CNC metal fiber laser cutting machine with safety shield: