Product Details

Introduction:

1. 2X belt pulley drive double stage rotary vane vacuum pump Resin Colloid Latex defoaming pump is high efficiency, low energy consumption & low power.

2. When works as a backing pump of booster pump, 2X could pump discharge the gas of booster pump continuously and keep the device with a higher vacuum degree.

3. 2XZ series Rotary vane type vacuum pump can be used independently ,which also can be as Booster pump , Diffusion pump ,Molecular pump and Titanium Pump's pre-pump.

4. It applies to metallurgy, chemical industry, electric light vacuum, vacuum coating, food packaging, medicine, plastic uptake, vacuum drying or other industries.

5. Advantage: High vacuum, Long time continuous work, low cost.

Products details:

Working Principle:	Two stage, rotary vane
Main applications:	Air & Gas, without Vapor and particle
Driver:	Electric motor, belt pulley
Power Specs:	220/380/415V 3phase; 220/240V 1phase; 50hz/60hz
Max.permissible fluid temperature:	40°C(104°F)
Type of connection:	Barb. Flange
Installation position:	Horizontal
Casing/Inner parts material:	Cast iron
Shaft seal type:	Mechanical seal
Limited vacuum:	≤6×10-2 Pa
Maximum drive rating:	7.5KW(10HP)
Maximum caliber:	100mm(4inch)
Flow rate range:	2-100L/s(4.2-211.8CFM)

Performance data:

Model			2X-2	2X-4	2X-8 2X-8A	2X-15 2X-15A	2X-30A	2X-70A	2X-100A
Pumping capacity(L/s)			2	4	8	15	30	70	100
Ultimate vacuum pressure	Gas ballast closed	Pa	≤6×10-2 (≤5×10-4)
Ultimate vacuum pressure	Gas ballast open	(Torr)	≤6×10-1 (≤5×10-3)				≤1.2 (≤1×10-2)
Motor power (KW)			0.37	0.55	1.1	2.2	3	5.5	7.5
Temperature(°C)			≤40
Inlet(mm)			20	32	32	50	65	80	100
Speed(r/min)			450	450	590	450	420	420	450
Cooling method			Air- cooled	Air- cooled	Air/Water -cooled	Air/Water -cooled	Water-cooled	Water-cooled	Water-cooled
Weight(kg)			50	55	80	110	232	330	450
Oil consumption amount(L)			0.7	1	2	2.8	3	4.2	5.4
Outline size(mm)	Length		560	560	780	790	780	910	990
	Width		310	330	430	530	500	650	850
	Height		390	380	540	540	560	700	970