Product Details

1. Adjustable Speed and Power, Smooth and Precise Engraving and Cutting

2. USB Interface, U-Flash Disk Supported, Can work without a PC.

3. Air Assist, Remove heat and combustible gases from the cutting surface.

4. Embedded Exhaust Fan, Easier intall, Safer transport.

5. Rotary Axis, Engrave any cylindrical object.

6. Cellular platform, Leave no chippings on working area.

7. Intuitive Control Panel, Set Speed, power and more controls directly from the laser.

8. Water Cooling and Protection System.

9. Lsser position.

10. Emergency Stop Button.

11. Larger Size, 400*600mm working area.

12. Lifting platform is electric control.

13. Drag - and - chain transmission line

14. Laser focal length: 5CM

Technical Parameters

Laser Power	50W, 60W, 80W, 100W
Supply Voltage	110/220V±10% ,50/60Hz
Max width	600mmx400mm
Working table	honeycomb
Up and down size	250mm
Table control mode	Manual/Electric
Max engraving Speed	1000mm/s
Max cutting speed	600mm/s
Locating Precision	<0.01mm
Min shaping character	Character 2x2mm ,Letter 1x1mm
Resolution	0.0125mm
Cutting thickness	0-15mm
Control Configuration	DSP
Data transfer Interface	USB
System Environment	WINDOWS XP/Win7/8
Graphic file format	BMP,PLT,AI,CDR,DXF
256 Color separation output	Support
360 degree slope engraving	Support
Off line working	Support
Cooling Way	Water Cooling
Operating temperature	5°C -35°C
Water protecting sensor and alarm	Yes
Net Weight	120Kg
Machine dimension	1150x850x1000mm