Product Details

Description:

BD-100M-POE is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3af standard, the AC/DC powered PoE media converter is a

Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Features:

10/100Base-TX UTP to 100Base-FX fiber media convertion
IEEE802.3af PoE PSE compatible
9K bytes packet at cut-through mode
Built-in AC/DC power supply
Over-current protection
choice of SC, BiDi or LC connectors for multimode and singlemode
DIP switch to set different configurations
LFP (Link Fault Pass-through) support
100Base-FX Optical interface:
Connector: SC,FC or ST are optional
Wavelength: 1310nm,1550nm or 850nm(can be chosen by customer)
Optical fiber category:
single-mode 8.3/125, 8.7/125, 9/125, 10/125um
multi-mode 50/125, 62.5/125, 100/140um
multi- mode connection: transmitting range can reach 5 kilometers as farthest;
single-mode connection: transmitting range can reach 120 kilometers.
10/100Base-TX：
Connector: UTP RJ45 connector
Data Rates:
10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
100Mbps (100Base-FX)
Power over Ethernet Output:
Pin Assignment and Polarity:4/5 (V+),7/8 (V-)
Output Power: please refer to ordering information
Efficiency: 75% min
Short circuit protection: auto recovery
Over current protection: auto recovery

Optic Specification:

Fiber connector	SC/ST	SC	SC	SC
type	multimode	Single mode	Single mode	Single mode
wavelength	850/1310nm	1310nm	1310nm	1310nm
Transmission distance	2km	25km	40km	60km
TX send power(min)	-19.0dBm	-15dBm	-9.0dBm	-4.0dBm
TX send power(max)	-12.0dBm	-9.0dBm	-5.0dBm	0dBm
Receive sensitivity	<-30dBm	<-30dBm	<-33dBm	<-36dBm
Link Budget	11.0dBm	15.0dBm	24.0dBm	32.0dBm

Dimension95mm(L)x70mm(W)x26mm(H)

Environment condition

Operating temperature: 0C~+55 C

Storage temperature: -20 C~+70 C

Relative temperature: 95%

Power supply

Input voltage:AC220V, AC100V~AC240V

Input frequency: 47 Hz to 63 Hz

Ordering information

BD-100M-POE	POE media converter,PSE,48V,25W,10/100M,dual fiber,20km,power AC 220V
BD-100M-POE-A	POE media converter,PSE,56V，30W，10/100M,dual fiber,20km,power AC 220V