Product Details

China supplier Rtv mould making Silicone rubber for Taxidermy Molding

Taxidermy Molding Silicone

1.Description

GC tin cure silicone liquid mold rubbers are used in many aspects of taxidermy to produce realistic wildlife and themed environments. Silicone mold rubbers are most often used to make flexible molds of real or sculpted antlers, claws, feet, noses, rocks and other scenery, and many other parts that need to be replicated in plastic or foam.

Casting materials, such as polyurethane plastics and polyurethane foam, are then poured into these silicone molds to produce finished parts for display. Popular product options is C-810/C-825/C-830.

GuoChuang Silicone is China top climbing holds molding silicone, silicone for climbing holds molding manufacturer and supplier. We export best silicone for molds, rtv silicone mold making to the world.

2. Technical Datasheet

Typical general characteristics	Inspection Method	Value
Product data (Catalyzed A+B)		C-810	C-825	C-830
Hardness	Shore A	10±2	25±2	30±2
Mix Ratio	A:B	100:3	100:3	100:3
Color	/	White	White	White
Pot life	25 °C (77F)	30-40mins	30-40mins	30-40mins
Curing time	25 °C (77F)	3-4 hours	3-4 hours	3-4 hours
Mixed viscosity	mPa.s	6000±1000	20000±1000	23000±1000
Tear-strength	kg/cm	12±2	22±2	23±2
Tensile-strength	M.pa	2.0±0.5	4.0±0.5	5.0±0.5
Elongation	%	320±50	450±50	460±50
Shrinkage	%	≤0.3	≤0.3	≤0.3

Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.

3. FEATURES

1.Low viscosit

2.great flexibility

3.Extra low shrinkage

4.Chemical resistance

5.release properties

6.Easy to work with

4.High tear strength

5.Heat Resistance

6.various color is available

7.High reproduction rate

4.SHELF LIFE:

When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.

5.Package

Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.

Curing Agent: 30g/bottle; 1kg/bottle