Product Details

ultrasonic water flow meterDescription Portable Ultrasonic Flow Meter

TUC-2000P ultrasonic flow meter is a non-contact instrument that measures both large diameter media flow and can not be used for measurements that are less accessible and observed. It is very accurate measurement, almost no interference with the various parameters of the measured medium, in particular, can not solve other instruments can not be corrosive, non-conductive, radioactive and flammable and explosive media flow measurement.

ultrasonic flow meter is designed to measure the fluid velocity of liquid in a full/closed pipe. It is a hand held measurement system which is both easy to install and use. It operates according to the difference in the transit time of flight measured, and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next.
Flow in the same direction takes less time to travel to the second transducer than does flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity. It can be used for metallic, plastic and rubber tubes.

Detailed Images ultrasonic flow meter china

Specification ultrasonic flow meter china

Better than 1% accuracy.

0.2% of repeatability.

Positive / negative / net flow totaliser

4 line LCD display.

Operate with clamp-on transducers.

RS-232/OCT output

Ni-MH Battery life for up to 12 hours continuous operation.

Repeatability	Better than 0.2%
Pipe size	15mm~6000mm
Accuracy	±1% of reading at rates>0.2 mps
Response Time	0-999 seconds, user-configurable
Velocity	0.03±32 m/s
Totalizer	7-digit totals for net, positive and negative flow respectively
Liquid Types	Virtually all liquids
Security	Setup values Modification Lockout. Access code needs unlocking
Display	4x8 Chinese characters or 4x16 English letters, display instant flow, velocity, total flow, signal status
Signal output	Non-isolation RS232(FUJI extension protocol), one channel isolation OCT output
Transducers	Clamp on type transducers
Transducer Cord Length	Standard 2x10 meters, optional 2x 500 meters
Power Supply	3 AAA Ni-H built-in batteries. When fully recharged it will last over 12 hours of operation. 100V-240VAC for the charger
Data Logger	Built-in data logger can store over 2000 lines of data Housing Material ABS
Case Size	100x66x20mm
Handset Weight	514g (1.2 lbs) with batteries

Features ultrasonic flow meter china

1.High accuracy

2.Wide measuring range
3.Large capacity battery
4.Built-in printer,Built-in data logger
5.RS485 communication interface
6.Multiple input and output signals
7.used in tap water, heating, water conservancy, metallurgy,chemical industry, machinery, energy, etc. Also can be used
for production of water, balance debugging, debugging, network monitoring, energy saving monitoring.

Selection Guide ultrasonic flow meter china

Type

HS Sensor

HM Sensor

S1 Sensor

M1 Sensor

L1 Sensor

S2 Sensor

M2 Sensor

L2 Sensor

Diameter

DN15-100