Product Details

FT43 Ball Float Steam Trap

Brief Introduction.

FT43 Ball Float Steam Trap, similar to Spirax Sarco Design, mainly used for steam system to drain condensate water.

Structural characteristic :
1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown and long life.
2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam.
3.No noise before operation in favor of environmental protection.
4.At the beginning of ventilation,all the valves start and lowtemperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment.
5.Internal component is made of stainless steel, corrosion and cavitation erosion proof.

Field of Application.

Product Name: FT44 ball float steam trap.
Pressure Rating: 1.6-4.0 Mpa.
Nominal Diameter: DN25 .
Body Material: cast steel.
Standard Flanges: DIN, ANSI, JIS, JB79.

Main Technical Parameters and Indexes of Performance.

Nominal pressure	PN16
Maximun design pressure(PMA)	16bar g
Maximun design temperature(TMA)	300
Minimun design temperature(TMI)	-10
Maximun upstream pressure for saturated steam service(PMO)	13bar g
Maximun operating temperature(TMO)	300
Minimun operating temperature(TMIO)	0
Maximun differential pressure( PMX )	FT43-4.5 4.5bar
	FT43 -10 10bar
	FT43 -14 14bar
Maximum cold hydraulic test pressure	24bar g

Material of Main Component.

Name of component	Material of component
Valve body, valve cover	WCB
Floating ball	stainless steel

Main External Dimensions.

DN	A
25	160