MF1K Pearl Colors

MF1K Pearl Colors

USD $1 - $100 /Piece

Min.Order:100 Pieces

Supply Ability:
100000 Piece / Pieces per Month
Port:
Guangzhou
Payment Terms:
T/T L/C

Quick Details View All >

Usage:
Car Paint
Main Raw Material:
Epoxy

Guangzhou Zhenroumei Chemical Coatings Limited

Business Type: Manufacturer
Guangzhou Guangdong China
Main Products: Automotive Coatings ,Automotive Paints ,Auto Paints ,Car Refinish Paint

Product Details

1、MF1K Pearl Colors

Automotive Paint company

Product Name/Model:MF1K Pearl Colors

 

Characteristic:MF1K Pearl Colors with excellent leveling property,easy construction,excellent adhesion power and coveraging power,can match all kinds of solid colors, metallic and pearl effect. Mainly applies to intermediate cars, MPV and bus.

Substrates

Well-Sanded, Completely dried and good existing finishes as bellow:
A original paint B. Old paint firm C. 1K or2k primer

Surface Cleaning

Wash by warm soap, remove wax, silicon and other contaminations with
degreaser, sanding with P800-P1000, wash with clean water then keep dry;
again with degreaser.

Mixing Ratio

MF1K Pearl Colors

Thinner

1

1

<15℃

MF1K Pearl Colors

60 Fast Thinner

15-30℃

MF1K Pearl Colors

61 Standard Thinner

>30℃

MF1K Pearl Colors

62 Slow Thinner

Spray Viscosity

14-16s to drop off, in 4# viscosity cup at 25°C,

ReTreatment

After spray, allow 10-20 minutes air-drying time,then spray clear coat at once.

Spray Gun Set Up

Gravity Feed: 1.2-1.5mm 3-5kg/cm²
Suction Feed: 1.4-1.6mm 3-5kg/cm²

Spray Technology

Coats&Thickness: 2-3 coats, total 15-20um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on
temperature and paint film.

Shelf Life

2 years in original sealed can, cool and dry place at 25℃.

Package

1L×12 or 3.75L×4

Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.


Contact Supplier

Ms. Qiqin Huang manager Chat Now
Telephone
86-020-87833698
Mobile
86-13503057711
Fax
86-020-87833398
Address
No. 16, industrial Avenue Shihai, Conghua City Guangzhou,Guangdong

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Chemicals > Coating&Paint
Categories
Hi~