Introduction
MCH ceramic heating component is a highly efficient environmental protection and energy saving ceramic heating components, mainly to replace now the most widely used alloy wire electronic components and PTC heating electric heating element and component.
Condition: New | Type: igniter | Power Source: Electric |
Place of Origin: Shannxi, China (Mainland) | Brand Name:KRHX
| Dimension(L*W*H):φ11.5*φ6.5*105 |
Voltage: 220v | Power(W):doublepower 1600w | Certification: CCC |
Production Technology
The MCH (metal ceramics heater) heating element is made by the following process. First, painting the high melting point metal (tungsten or molybdenum manganese) paste on to the Al2O3 casting briquette in coordinate to the circuit design, then another layer of sintering additives. After that, repeating the process to build multiple layers. Then, they are sintered together under 1600 °C hydrogen gas environment. Finally, nickel leads are brazed at 800 °C onto the metal end and put on with Teflon sleeve, which make it a MCH heating element. It is a new type of high efficient heating elements, which can save more than 20%-30% power effect compare to PTC ceramic heaters.
Technical features
1. Energy saving, high thermal efficiency, the unit heat capacity than the PTC save 20%-30%;
2. Security is not charged surface, insulation performance is good, can endure the withstand voltage of 4500v / 10s test, no breakdown, leakage current <0.5mA ;
3. No impact current peak;
4. Heating up fast;
5. Without power attenuation;
6.Security, the halogen-light;
7. Good heat uniform consistency, high power density;
8. Environmental protection, do not contain lead, cadmium, mercury, hexavalent chromium, such as pests, in full compliance with the eu ROHS environmental protection requirements;
9. Long service life.
10.At present the highest temperature can reach 500℃, especially suitable for industrial electric oven.
