DTS-38X3P360 slip rings is designed for passing 3 ways 360A current in narrow space, of which the current was lead out by copper strip from stator side and rotor side. The shaft of slip rings is made by heat-resisting plastic. There is a key slot in the shaft to fix and drive the shaft. Silver alloy contact material was brazed welding on the beryllium copper spring. And the spring components are fixed on the brush holder. Separated stator part fits for narrow space. This slip ring can work well in 3000RPM, based on good thermal design & heat-resisting materials.(More product information welcome to visit .)
Feature:
1) One-piece shaft design;
2) Silver alloy contact materials;
3) High operating speed;
4) Separated design;
5) Fit for use in the working conditions of high temperature.
2) Silver alloy contact materials;
3) High operating speed;
4) Separated design;
5) Fit for use in the working conditions of high temperature.
Technical specification:
Channels | 3 rings(for signal) |
Operation Voltage | 0~380VAC/DC |
Current | 120A/Ring |
Operate speed | 3000RPM |
Contact material | Precious Metal |
Operate temperature | -30~240℃ |
Electric noise | Max.40m Ω |
Dielectric strength | 500VAC@50Hz,60s |
Insulation resistance | 500MΩ @600VDC |