Product Details

D49 100x100 mm Steel Fabric Wrapping Meshes 4.8 x 2.4 m

The unique deformed wire pattern (curry pattern) offers superior bonding, improved stress distribution and crack-width control
Ferro-Fabric is available in a wide range of diameters and apertures. The products can be bent to shape as required
Manufactured from hard drawn wire (smooth) and cold rolled wire (deformed)
All intersections are resistant-welded thereby not reducing the tensile strength of the wires
Mesh has an average shear strength equal to 80% of the wire strength
The wire used has physical properties which are rigidly controlled to produce mesh with maximum weld strength combined with ductility
The steel specifications allow for cold rolled wire with a minimum ultimate tensile strength of 510Mpa and a high resistance to fatigue
Mesh is available in black (pre-galvanised) and galvanised sheets or rolls
Also available on request: plastic coated and hot dipped (galvanised) mesh
Quality Control
Reinforcing mesh is produced to highest quality standards and complies to ISO 9002. Thorough testing of wire strength, welds and aperture sizes is continuously performed at all stages of the manufacturing process. Final inspections ensure that highest standards are maintained.
Standard Sizes
Reinforcing mesh is available in rolls (60m x 2,4m) and sheets (6m x 2,4m), manufactured according to standard sizes. Wire diameters vary from 3,55mm to 12mm. Mesh aperture can be as small as 100mm x 100mm.
Special Mesh
Specialized machinery is used to produce weld mesh with non-standard aperture sizes. The spacing of wires in either direction is variable between 25mm and 150mm. Customized mesh is available on request according to specifications provided.
the Reinforcing Mesh Data Sheet
Standard sizes of welded mesh fabric
Specifications: Sheets: 6m x 2,4m or Rolls: 60m x 2,4m
Based on SABS 1024/2006 specifications for welded steel fabric for concrete reinforcement

			SHEETS ONLY						SHEET OR ROLLS
MR Reference number			888	746	617	500	395	311	245	193	100	156	200
Mesh Size	Nominal Pitch of Wires	Main(mm)	200	200	200	200	200	200	200	200	200	100	100
Mesh Size	Nominal Pitch of Wires	Cross(mm)	200	200	200	200	200	200	200	200	200	100	100
Wire Sizes		Main(mm)	12	11	10	9	8	7,1	6,3	5,6	4,0	3,55	4,0
Wire Sizes		Cross(mm)	12	11	10	9	8	7,1	6,3	5,6	4,0	3,55	4,0
Cross Sectional Area Per Meter Width		Main(mm2)	566	475	393	318	251	198	156	123	63	99	126
Cross Sectional Area Per Meter Width		Cross(mm2)	566	475	393	318	251	198	156	123	63	99	126
Nominal Mass/m2		kg	8,88	7,46	6,17	5,00	3,95	3,11	2,45	1,93	1,00	1,56	2,00
			SQUARE									GUNITE
			SHEETS ONLY						SHEETS OR ROLLS
MR Reference number			1085	943	772	655	517	433	341	289	278	226	133
Mesh Size	Nominal Pitch of Wires	Main(mm)	100	100	100	100	100	100	100	100	100	100	100
Mesh Size	Nominal Pitch of Wires	Cross(mm)	200	200	200	200	200	200	200	200	300	300	300
Wire Sizes		Main(mm)	12	11	10	9	8	7,1	6,3	5,6	6,3	5,6	4,0
Wire Sizes		Cross(mm)	8	8	7,1	7,1	6,3	6,3	5,6	5,6	4,0	4,0	4,0
Cross Sectional Area Per Meter Width		Main(mm2)	1131	951	786	636	503	396	312	246	312	246	126
Cross Sectional Area Per Meter Width		Cross(mm2)	251	251	198	198	156	156	123	123	42	42	42
Nominal Mass/m2		kg	10,85	9,43	7,72	6,55	5,17	4,33	3,41	2,89	2,78	2,26	1,33
			STRUCTURAL								LONGITUDINAL

The MR Reference Number is the nominal mass in kilograms per square meter multiplied by 100.
The sizes given above are standard and are the most generally used. We can, however, manufacture mesh to other specifications,
both in size of wires and spacing.
Hard drawn wire to British standards 4482 has a minimum breaking strength of 510MPa and a minimum yield point of 485MPa.
Full size section of wires
Design specifications for special mesh, Mass at various spacing kg/m2

Wire Size	Mass(Kg/m)	Spacing of wires(mm)											Wire Size
Wire Size	Mass(Kg/m)	50	75	100	125	150	175	200	225	250	275	300	Wire Size
12	0,888	17,76	11,84	8,88	7,10	5,92	5,07	4,44	3,94	3,55	3,23	2,96	12
11	0,746	14,92	9,95	7,46	5,97	4,97	4,26	3,73	3,32	2,98	2,71	2,49	11
10	0,617	12,33	8,23	6,17	4,94	4,11	3,53	3,09	2,74	2,46	2,24	2,06	10
9	0,499	9,99	6,66	4,99	3,99	3,33	2,85	2,50	2,22	2,00	1,81	1,66	9
8	0,395	7,90	5,26	3,95	3,16	2,63	2,26	1,97	1,75	1,58	1,44	1,32	8
7,1	0,311	6,22	4,14	3,11	2,49	2,07	1,78	1,55	1,38	1,24	1,13	1,04	7,1
6,3	0,245	4,90	3,27	2,45	1,96	1,63	1,40	1,22	1,09	0,98	0,89	0,82	6,3
5,6	0,193	3,87	2,58	1,93	1,55	1,29	1,11	0,97	0,86	0,78	0,71	0,64	5,6
4,0	0,099	1,98	1,32	0,99	0,79	0,66	0,57	0,50	0,44	0,40	0,36	0,33	4,0

Cross sectional areas at various spacing mm2 per meter
Area at various spacing