Digital Type Lithium Battery Crush Testing Machine/Equipment

Application  

Through the extrusion test, The machine use for testing the safety performance through the extrusion/crushing/squeezing test. After testing, the battery should not catch fire,smoke or explode. It is also an essential testing device for every battery manufacturer and Research Institute.                                                    

Features(Digital Type Lithium Battery Crush Testing Machine/Equipment)

1.The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.

2.Lighting system is designed to observe the internal testing process; The inner box materials are resistance combustible materials.

3. Crush Force controllable within range from 250N to 13KN ,meet different standards;

4.The time can be set, the precision is higher, and the maximum force can be displayed directly.

5. Be equipped with the exhaust air vent  (it is convenient for customers to discharge the odor produced in the battery test to the outside of the laboratory).

6.Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety and Easy operation.

7. Double-layer explosion-proof glass window and explosion-proof chamber.

Specification(Digital Type Lithium Battery Crush Testing Machine/Equipment)

Products image(Digital Type Lithium Battery Crush Testing Machine/Equipment)

Standard Compliance

MT/T 1051-2007, UL1642-2005, UL2054-2005, SJ/T 11169-1998(=UL 1642:1995), GB/T31485-2015, YD 1268- 2003, SJ/T 11170-1998, GB/T 8897.4-2002, IEC 62133 etc.

Test Method(Digital Type Lithium Battery Crush Testing Machine/Equipment)

1.The battery is squeezed between the two plates and the upper plate is R75 hemispherical shape. The extrusion pressure come from the hydraulic pressure head with the diameter of the 32mm piston. After the test battery was firmly clamped, start to apply the squeezing force until pressure gauge reading reaches to 2500(17.2Mpa).It will be suddenly released when the prossure below the two plates reach 3000 pound(13KN).                                             

2.The cylindrical and prismatic battery cell need make the longitudinal axis parallel to the plane of the extrusion device for extrusion. Prismatic battery still need rotate around its longitudinal axis 90 degrees placing ,so as to make the wide and narrow side could bear the squeeze pressure. Each battery  sample is subjected to pressure in one direction. Different samples should be used in each test.

in or button type battery need make the battery plane parallel to the plane of the extruding device to bear pressure.


Our Factory

Short introduction about LIK factory:
We are a long history testing equipment manufacturer, in the past 10 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine and battery test equipment. In the research and development of the non-standard dynamic environment chamber, LIK is in the leading position in the industry and we have got more than 30pcs patents. 

LIK main test equipments:
Environmental test chambers, temperature (humidity) chamber,Thermal shock chamber, High low temperature test chamber, Salt spray test chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in constant temperature and humidity test chamber,Vacuum oven, Drying Cabinet, electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber, Powe battery crush and puncture test machine, Battery shock impact test machine, Battery Squeeze test machine, battery short circuit tester, Battery burning jet test equipment, Battery needling/nail punture/acupuncture test machine, etc.

Our Service

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. We accept on-site service If customers require.

1. Pre-service
24 Hours online service for your consult. 
Help choose right model, and a series of service, person, advise. Main web site: /
1) More than 10 years manufacturer experience in test equipments and with strong research and development team. 
2) Acceptable customization for all kinds of specical specification products.
3) We value the inquiry sent to us timely, ensure quick and competitive offer.
4) We put your order into our tight production schedule,ensure your punctual delivery time.
5) We are a sales team, with more than 10 years experience, more professional and reliable
6) Our professional team could provide the best suggestion as long as you tell us what kind of test you need to do and the required specification.
7) Welcome to view our factory at any moment .
2. After sale service
1) We deal with your complains within 24 hours and  solution provide within 3 working days.
2) Trainning how to instal the machine, training how to use the machine. We would offer operation video and English operation muanual. We can provide video-con.
3) 1 year warranty service and all life maintenancee; our engineers could go to your place for better service necessarily.
4) All staffs in our company with philosophy of " integrity, dedication, truth-seeking, enterprise", would be dedicated to provide high  quality service and products for you.
3. Commitment: 
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us. 
4. Good Packaging: 
Good Packaging: All goods are covered with film and air bubble film before put them into the strong wooden case.

How to Contact Us?

Please Send your inquiry Details in the below Or send to my mail below directly. We promise reply your inquiry on time.