Introduction:
Cable corrosion test apparatus is used to test the acidity of the gas that released during combustion from cable or optical cable components material; The equipment is designed and produced on the basis of GB/T 17650 and IEC 60754.The cable material is processed by prius tube furnace, and then the pH value and conductivity of the gas that generated in combustion process are measured,so that the cable material of acidic,as well as concentration of halogen acid gas volume, PH, conductivity, etc, can be determined.
International standards:

1. IEC 60754-1 Ed. 2.0 b:1994
2. IEC 60754-2 Ed. 1.0 b:1991 
3. GB/T 17650 

Features:

1, The tester designed with optimized structure, logical layout and easy to operate.

2, Al the fixtures are made of stainless steel.

3, The effective length of the tube-type furnace is 500~600mm, inner diameter is 40~60mm, with adjustable electric systems.

4, Equipped with imported thermocouple from United States.

5, The size of the combustion boat is length 45~100mm, width 12~30mm, depth 5~10mm.

6, The electrical conductivity measuring range is 0.01uS/mm~100uS/mm.

7, The control system using an electronic temperature control, intelligent control tube furnace temperature.

8, Equipped with two gas collection bottles.

Specifiction: