The CT-15 pipe Cutting Machine is used to rotate the tube by a rotating set of rotating equipment, which can be controlled by cutting off the pipe by cutting off the pipe and using the blade Angle.The end of the tube is basically without burrs.This method saves the cleaning of burr under other cutting methods.The pneumatic mechanism controls the elastic clamping head, which is connected with the cutting tool joystick, and the production efficiency is quite high.Single board can break material 8000-10000.The limit mechanism is used to adjust and control the length of the material.When using this machine, the user must be able to use the machine's center to make the tube and stand.

If you need to cut the larger pipe, you can choose the ct-30 pipe.

This machine can be used in the cutting pipe of various kinds of electric heating pipes, such as the production of heat flux tube, the production of single-head tube electric heat pipe, and the production of electric heat pipe.

Power: 0.75 KW

Loading speed: according to the size of the pipe material, generally 8 hours 10,000

Cutting range: 5-15 mm Φ Φ

Power supply: 3 phase 380V 50Hz

Main technical parameters:

Motor power: 380V 50HZ 750W

Speed: 900rpm 1800rpm

By largest diameter: Φ 15 mm

Use air source: 0.6mpa clean compressed air

Machine size: 1140*870*720 mm (manual measurement, for reference only)