Low Coal Seam Long-wall Mining Shearer
USD $50000 - $2100000 /Set
Min.Order:1 Set
Beijing HOT Mining Tech Co Ltd
Low Coal Seam Long-wall Mining Shearer
1.Introduction of low coal seam long-wall mining shearer
Adapt well to the underground fluctuation.
The machine height is low which can meet the requirement of low coal seam mining height. The machine is short to meet the requirement of bottom plate fluctuation.
2.Features of low coal seam long-wall mining shearer
1)Convenient maintenance
Its structure is convenient to maintenance and replacement: installation of electric parts adopts drawer type structure. The motor, pump, electric control box and walking airborne parts can be drawn from the goaf side. Main control box strengthens the effect of vibration damping and anti-vibration.
2)Higher degree of automation
MES dedicated controller is the core part to detect and monitor shearer operating conditions. It has the functions of Automatic control with constant power, gas overrun alarm, dangerous value protection, fault diagnosis, voice warning alarm, complex condition monitoring, automatic control and centralized control.
3)Strong vibration detection and analysis technology of transmission system.
Transmission parts(cutting part, hauling part)establish multi point vibration testing system which can do microscopic detection to transmission system. There are vibration test criterions which can provide scientific and effective basis for evaluating the whole performance of shearer transmission system. It can accurately estimate the fault of the transmission system in order to ensure that each one of the shearer transmission parts can achieve the best working performance through the reasonable data processing and analysis.
4)It has functions of intelligent fault diagnosis and protection.
5)There is black box data storage system which has the function of fault memory and query.
6)Perfect intelligent self-diagnosis system, display in the form of illustrations and pictures.
7)It has the functions of fault location and alarm, protection functions of overload, short circuit, loss of phase, electric leakage, overvoltage and under voltage.
3.Parameters of low coal seam long-wall mining shearer
Model | MG210/485-PWD |
Mining height range | 0.95~1.7m |
Coal hardness | f≤4 |
Machine length | 6280mm(Φ0.85m drum) |
Voltage | 1140V |
Face gradient | ≤40° |
Total installed power | 485(484)KW |
Machine width | 1920mm |
Drum diameter | Φ950mm~Φ1100mm |