Advantage:

1. Corrosion resistant, be suitable for all kinds of ink.

2. It can balance the ink supply and guarantee the high speed of printing without break.

3. Good quality which is as same as the original damper.

4. Can filter the ink well.

5. Protect your printer head from clogging.

 How to use:

1. Execute ink discharge operation from all the ink passages.

2. While pushing the cutter area gently, shift the carriage to the left about 2cm to unlock the carriage and then move the carriage to the printer center.

3. Loosen one screw (CP (W):M3*6) securing the front end of the Damper Holder and separate the Damper Unit from the print head.

4. Disengage the three hooks of the Damper Holder and remove the Damper Holder.

5. Pull out the relevant Damper ASSY from the Damper Holder, loosen the coupling screw and separate the DAMPER ASSY from the ink tube.

Kindly attention:

1. Take care not to lose the O-ring inside the coupling screw.

2. You need to replace a new damper if it is jammed by weak quality ink, Otherwise it will damage the nozzle.