EZO-pH EZO pH Circuit
Negotiable /Piece
Min.Order:1 Piece
EZO pH Circuit
EZO-pH EZO pH Circuit Operating principle
A pH (potential of Hydrogen) probe measures the hydrogen ion activity in a liquid. At the tip of a pH probe is a glass membrane. This glass membrane permits hydrogen ions from the liquid being measured to defuse into the outer layer of the glass, while larger ions remain in the solution. The difference in the concentration of hydrogen ions (outside the probe vs. inside the probe) creates a VERY small current. This current is proportional to the concentration of hydrogen ions in the liquid being measured.
EZO-pH EZO pH Circuit Dimensions
EZO-pH EZO pH Circuit Power consumption
LED | MAX | STANDBY | SLEEP | |
5V | ON | 18.3 mA | 16 mA | 1.16 mA |
OFF | 13.8 mA | 13.8 mA | ||
3.3V | ON | 14.5 mA | 13.9 mA | 0.995 mA |
OFF | 13.3 mA | 13.3 mA |
EZO-pH EZO pH Circuit Absolute max ratings
Parameter | MIN | YP | MAX |
Storage temperature (EZO™ pH) | -65 °C | 125 °C | |
Operational temperature (EZO™ pH) | -40 °C | 25 °C | 85 °C |
VCC | 3.3V | 5V | 5.5V |
EZO-pH EZO pH Circuit Specifications
Reads | pH |
Range | 0.001 - 14.000 |
Accuracy | +/- 0.002 |
Max rate | 1 reading per sec |
Supported probes | Any type & brand |
Calibration | 1, 2, 3 point |
Temp compensation | Yes |
Data protocol | UART & I2C |
Default I2C address | 99 (0x63) |
Operating voltage | 3.3V - 5V |
Data format | ASCII |
Circuit dimensions | 13.97mm x 20.16mm (0.55" x 0.79") |
Weight | 1.76 grams |