Product Details

Battery powered trolley for handling die transfer cars

Brief Introduction of battery powered trolley

Steerable transfer cars can run without steel rail. It is consisted of power source, gear train, steel structure bearing frame, steering gear, running gear, control system and fault diagnosis module. Usually, accumulator is chosen as power source. The current is supplied to the pulling motor through electric control system, which makes the car start, stop, move forward, move backward, turn around and realize other functions. All the cars are equipped with warning alarm and security detection apparatus, and the alarm would ring and the car would stop immediately if there was any obstacle or pedestrian in the running path of the car. Also, we will provide intelligent automatic rapid charger with the car. Positioning fixture, lift platform and other assistive device are optional to meet different demands on various occasions. The PLC is also alternative if it’s necessary.

Application of battery powered trolley

This kind of battery powered trolley is mainly applied in assembly line, metallurgy industry, warehouse transport, ship industry, workpiece transport in workshop, lathe transport, steel factory, construction, petroleum industry, energy, chemical industry and railway.

Parameter of battery powered trolley

BWP SERIES TRANSFER CAR TECHNICAL PARAMETERS
Model	BWP-5t	BWP-20t	BWP-30t	BWP-40t	BWP-50t
Rated Load(t)	5	20	30	40	50
Impacted rated load(t)	7.5	30	45	60	75
Structure of Frame	Steel plates welded, beam
thickness of the steel plate	8	14	14	16	16
Cart weight(t)	4.3	7.9	8.8	10	10.5
Max. wheel load (t)	2.8	5.6	7.7	10	12
Ground requirement	Cement floor or Steel plate ground
Ground Clearance(mm)	50	50	50	50	50
Table size (mm)	3000*2000	4500*2200	5000*2200	5500*2300	6000*2300
Height of the whole cart (mm)	450	600	650	700	700
Wheel base (mm)	1500	1700	1700	1800	1800
Axles distance (mm)	2500	3900	4300	4800	5200
Turning radius (mm)	2501	3901	4301	4801	5201
Turning type	Turning while driving with no stop
Control method for turning	Control button
Turning structure	Mechanical
Motor power (KW)	3.5	7	10	12	15
Wheel diameter (mm)	300 (4)	400 (4)	400 (6)	500 (6)	500 (6)
Wheel material	ZG55+hydropurture
Running speed (m/min)	0-15			0-12
Brake principle	Electric magnetic brake
Ground balance	mechanical automatic adjustment
Operation method	With wire or no wire
Battery model	D-250 24pieces	D-440 24pieces	D-250 36pieces	D-330 36pieces	D-440 36pieces
Battery maintenance	Free of maintenance
Charger's installation	Installed on cart			Split-type
Cart color	Yellow and warning sign
Charger's function	Automatic stop for obstacles
Radar control	3-0.3 m, Automatic stop for obstacles
Warning equipment	Sound and light
Other functions	Turning light, night light and power display