Characteristics of concrete scarifier machine:                                                                         

With a vacuum cleaner connection device providing a dust-free working environment

Can work for a long time strongly and powerfully

Can accurately adjust the depth of the ground milling, which can be 0.8-10mm

With a tungsten steel milling cutter with 60mm diameter , adjusting the walking speed effectively

Particularly suitable for a wide range of ground handling, fast, and high efficiency.

The main scope of scarifying machine:

1. The surface waterproof and chisel of the surface of the bridge, the smoothness and waterproof of the beam surface of the high speed railway box girder.

2, asphalt pavement swelling, rutting, net crack, pit groove milling clearance. Clear the ice and snow on the bridge and the pavement.

3, the new asphalt concrete before paving of the original old pavement mild nap, or with large milling machine corner and reinforced with complete area milling operation galling.

4, remove ground coating, paint, all kinds of traffic marking; when the ground damage and pollution need to be refurbished, the surface of the old floor is removed.

5, remove the airport road marking, the tire brake trace of the runway tire and so on, and get the rough surface with high friction coefficient.

6. Milling and leveling of cement bituminous pavement, highway bridge deck, bridge staggered platform, super high position of epoxy resin wear-resistant ground

7. Construction of the road micro table, the old pavement surface layer is cleaned and planed, and the slurry seal is prepared.