3D Sublimation Transfer Film for 3D Sublimation Machine

Heat transfer printing film, mobile phone protective sleeve printing film, surface vacuum heat transfer

Product gloss: semi transparent, silver

The use of ink: sublimation ink,

Product thickness: 0.175MM

Product weight: 300g/ square meters

Product specifications: A5 A4 drum

Product use: mobile phone shell, mouse and other electronic products shell, ceramic, glass, crystal, stone and other smooth surface

Product characteristics: applicable to all kinds of plane surface, vacuum thermal transfer printing, dye sublimation ink used, colorful, lifelike.

Using method: first, the pattern of their favorite with low temperature (110 degrees -180) thermal transfer ink printing to the transfer film, the ink is completely dry, the use of vacuum heat transfer equipment, the pattern transfer to a variety of flat or curved surface.

Note: This product should be stored in moisture, without using the need to seal the preservation, that is to play, in case of moisture can be used with hot air or oven drying at low temperature, does not affect the use.

3D Sublimation Transfer Film for mobile phone case decoration

Due to its unique high porosity design our 3D film holds up to 50% more ink than other competitive products on the market without losing any image clarity. Our 3D film produces sharp smooth finishes that are virtually dry on printing, therefore greatly reducing mess and waste.

1. High porosity coating dries within seconds of leaving the print head resulting in no more smeared images on high production runs

2. The glass-like coated surface prints a mirror-like finish which equates to glossy transfers of your images

3.The unique surface permits heavier ink loads resulting in extremely vibrant transfers

4. High quality ink transfer with no mess and no pooling ink on the surface of your film

5.The most cost effective 3D film on the market

6.Available to purchase without being tied into buying expensive machinery or licensing agreements

7.Utilising the optimal micron thickness and anti-pop technology, Pictaflex 3D film allows just the right amount of stretch to avoiding popping, creep smearing and film creasing. Costly film and product wastage is therefore greatly reduced.

8.The films are precut for easy printing