LT800L Liquid Turbine Flowmeter
LT800L liquid turbine flowmeter is a kind of vane wheal flowmeter, assembled with sensor and transform display. It adopts multi blades rotor as sensor to measure average flow velocity, thus flow or volume are deduced. Turbine flow meter is widely used in petroleum, chemical industry, scientific research, measuring etc.
Features:
High accuracy: 0.2%, 0.5%, 1%
Good repeatability
Output signal: pulse, no zero drift, good anti-interference.
High signal resolution.
Easy installation.
Specifications
DN & Connection type: | 4, 6, 10, 15, 20, 25, 32, 40 (for thread/screw connection) 15,20,25,32,40,50, 65, 80, 100, 125, 150, 200 (for flange connection) |
Accuracy: | 0.5%, 1%, 0.2% (special customized) |
Range ratio: | 1:10, 1:15; 1:20 |
Material: | 304SS, 316SS |
Ambient: | Temp: -10 to 55C, humidity: 5%-90%, pressure:86-106Kpa. |
Output signal: | Sensor: pulse Transform display/ transmitter: 2 wired, 4-20mA |
Power supply: | Sensor: 12VDC, 24VDC Transform display/ transmitter:24VDC In site display: 3V lithium battery |
Signal wire: | STVPV 3*0.3 (3 wired), 2*0.3 (2 wired) |
Signal output distance: | Less than 1000m |
Electrical connection | Hischmann, M20*1.5 |
Explosion proof: | Ex d IIB T6 |
Protection class: | IP65 |
DN, Flow range and pressure:
DN (mm) | Normal Flow range (m3/h) | Expand Flow range (m3/h) | Norminal pressure range (Mpa) | Special pressure range (Mpa) for flange connection |
DN 4 | 0.04-0.25 | 0.04-0.4 | 6.3 | 12, 16, 25 |
DN 6 | 0.1-0.6 | 0.06-0.6 | 6.3 | 12, 16, 25 |
DN 10 | 0.2-1.2 | 0.15-1.5 | 6.3 | 12, 16, 25 |
DN 15 | 0.6-6 | 0.4-8 | 6.3, 2.5 (flange) | 4.0, 6.3, 12, 16, 25 |
DN 20 | 0.8-8 | 0.45-9 | 6.3, 2.5 (flange) | 4.0, 6.3, 12, 16, 25 |
DN 25 | 1 to 10 | 0.5-10 | 6.3, 2.5 (flange) | 4.0, 6.3, 12, 16, 25 |
DN 32 | 1.5-15 | 0.8-15 | 6.3, 2.5 (flange) | 4.0, 6.3, 12, 16, 25 |
DN 40 | 2 to 20 | 1 - 20 | 6.3, 2.5 (flange) | 4.0, 6.3, 12, 16, 25 |
DN 50 | 4-40 | 2-40 | 2.5 | 4.0, 6.3, 12, 16, 25 |
DN 65 | 7-70 | 4-70 | 2.5 | 4.0, 6.3, 12, 16, 25 |
DN 80 | 10-100 | 5-100 | 2.5 | 4.0, 6.3, 12, 16, 25 |
DN 100 | 20-200 | 10-200 | 1.6 | 4.0, 6.3, 12, 16, 25 |
DN 125 | 25-250 | 13-250 | 1.6 | 2.5, 4.0, 6.3, 12, 16 |
DN 150 | 30-300 | 15-300 | 1.6 | 2.5, 4.0, 6.3, 12, 16 |
DN 200 | 80-800 | 40-800 | 1.6 | 2.5, 4.0, 6.3, 12, 16 |
Model and Ordering guide:
LT800L | Liquid Turbine Flowmeter | ||||||
DN | *** | 4, 6, 10, 15, 20, 25, 32, 40 (for thread/screw connection) | |||||
Material | 1 | 304SS | |||||
2 | 316SS | ||||||
Accuracy | 1 | 0.20% | |||||
2 | 0.50% | ||||||
3 | 1% | ||||||
Connection type | F | Flange connection | |||||
I | Thread/screw connection | ||||||
Electrical connection | H | Hirschmann | |||||
M | M20*1.5 | ||||||
Maximum flow range | *** | Write the max. Flow range m3/h |
Liide Technology & Equipment CO, Ltd
Contact: Amanda
Mobile Phone: +86 15349210324 Email: Amanda@liidetech.com skype: amandalxx1990