Product Details

WORKING PRINCIPLE

when this machine start working, the used oil will be injected into the primary filter under the pressure, the primary filter will remove the big impurities, then the oil which just contains the particles is heated by the heater. Then the treated oil enter into the vacuum separator, the vapor is separated from the oil and refrigerate to water under the process of the lowest-vacuum pressure and the degassing equipments. The last procedure is that the fine filter removes the particles completely.

ADVANTAGE

Comparing with the single-stage vacuum oil purifier, this machine dewaters, degases and removes the impurities more quickly, more completely, and improves the oil breakdown voltage much higher. As the bridge-type vacuum linking system, it is used for filtrating system as well as an independent vacuum power supply to vacuum oiling of power equipment.

TECHNICAL DATA

Parameters		Unit	ZYD-30	ZYD-50	ZYD-100	ZYD-150	ZYD-200	ZYD-250	ZYD-300
Flow		L/min	30	50	100	150	200	250	300
Working vacuum		Mpa	-0.08 ～ -0.099
Working Pressure		Mpa	≤0.3
Temperature Range		℃	20 ～ 80
Power			380V/ 50Hz/ 3Phase( Or as per customer’s request)
Working Noise		Db（A）	75	75	75	80	80	80	80
Heating Power		KW	30	30	45	60	75	90	120
Total Power		KW	35.5	37.5	52.5	71.4	86.5	102.5	135
Inlet/Outlet		mm	φ25	φ32	φ42	φ50	φ50	φ60	φ60
Weight		Kg	600	800	1050	1400	1800	2000	2200
Overall	Length	mm	1050	1100	1200	1450	1600	1800	1900
	Width	mm	750	800	950	950	1100	1200	1200
	Height	mm	1350	1400	1500	1650	1800	1900	1900
After Filtration
Breakdown Voltage		KV	＞70
Water Content		PPM	＜5
Gas Content		%	≤0.1%
Particle Size		μ	≤1 ～ 5(without free carbon)
Acid Value		mgKOH/g ≤0.03

Contact me freely at ansen@oilsolution.cn for details or other oil purifiers.

Whatsapp: 0086-13668080522