If you don't trust just yourself in business then 
you need us because also we when we do this 
work don't trust until make sure 100% there is 
no ration for mistake in this type of work

Last several years more and more fake company 
get in , but our point not just with the fake company , 
We have experience more than 7 years in inspection
in china , and some company they are real and 
working as the customers demand but sometimes 
some of them they want to make more money , 
they change the quality , they keep the shape is 
100% the same as the original , like these issues 
its our work to make your business safe ,
Another point with the mistake , many company 
are real and working good , but sometimes because
the different language or different thinking , happen
some mistakes 
Some of these mistakes they don't mean it , but you
have to be safe because sometimes very small mistake
call kill all the work 
We can also when you inspection to make sure about 
the details the customer already told the company or the factory

g

Very important notice : All our inspectors provides by all the types
for communication program like WeChat ,Viber , Whatsup ....
and we support them with Wi-FI conection to make our 
customer able to make a video call to let the inspector work as the
points customer need exactly

Final Shipment Inspections check for quality and quantity
issues after production is at least 80% completed and 
either at the factory, or less often at the forwarder or re-seller's warehouse.

Use just this service if your budget allows for only one 
inspection. If concerned about shipment delay due to product 
reworking or dispute, add an IPI.

IN-PROCESS INSPECTION

In-Process Inspections are performed during the production process
so that any quality control issues can be more quickly and easily
resolved and any delays in the shipping schedule avoided.

Use this service if quality control issues could cause shipment delay, 
product reworking expense, or unwanted confrontation with the factory or supplier.

FIRST ARTICLE INSPECTION

First Article Inspection is the critical analysis of the first item
manufactured to verify correct setup, correct process alignment, 
and to verify that the product is in the correct, specified configuration.

Use this service if your product is being manufactured in a manner 
where the quality of the first unit produced will likely represent future units.

CONTAINER LOADING CHECK

Container Loading Checks are performed during the loading process
to assure the correct quantity of cartons are loaded. If requested,
results can usually be reported back in real-time.

Use this service if your main concern is receiving the correct number 
of cartons or crates, or that the cartons/crates are correctly loaded. 
Not a quality check.

Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service  Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service Inspection Service 

MFG PROCESS SUPERVISION

Manufacturing Process Supervisions are performed during production
to assure that the specified processes are followed, thereby avoiding
unwanted product reworking time/expense.

Use this service if you must ensure that the product is manufactured 
correctly the first time through. An FSI inspection is also highly suggested.

DEFECT SORTING INSPECTION

Defect Sorting Inspections help avoid product reworking time and
expense by sorting out defectives prior to shipment. Defectives are 
pulled from the shipment and the remaining goods are shipped.

Use this service if your main objective is immediate shipment of
the remaining defect-free units. Factory labor is utilized to assist
in sorting through the goods.

COMPLETE FACTORY AUDIT

Complete Factory Audits cover factory ownership and management,
factory size, production capabilities, legal status, machinery, materials,
packing, quality control, test equipment, certifications, as well as basic social compliance factors.
Use this service if you would like a truly comprehensive, in-depth appraisal
of a prospective supplier to better determine their suitability as a trading partner.

B