Inflatable boats are widely used for leisure and entertainment or fishing . There are some air chambers in it . Even neighboring two chambers broken , it still could been used safely in the water . Our valves are imported . They are much stronger , More convenient , Safer and reliable.

Product repair mation :

1.Check the broken part.

2. Estimate the repair size .

3.Cut the repair material and round the sharp edge.(It is important , caus it can avoid the patch peeling from the corner)

4.Put them together and draw range with pencial.

5.Clean the broken part and the backside of repair part. Make sure No dust. If dust in it , it couldnt be cemented.

6.Take approprite glue on the surface of broken park a little is enough and apply it evenly.

7.Lest do the same thing on the backside of repair part.

8.Wait for 10-15 minute until both surface of the glue paste is totaly natural withering . 

9. In order to dry faster , you can use the hair-drier .Pay attention , use the Cold Wind First.

10.Fully dry , not glue the hand . And affer using the cold wind , you need to wait for 10 Minute to keep it dry.

11. After 10 Minutes , Put them together and press it with your finger or some stick objects.

11. Use the warm wind to heat the two glued surface.

12. At the mean time , you can carring on smooth the surface with the rigid object.

13. After two hours , It is totally blend toether , you will find it is stronger than before.

 According to different modes of transport, select the appropriate packaging,Products and games are packaged to arrive in a professional manner.

Shipping:

1) By sea when in large volum, for 25 days to 45 days arrive;

2) By air when need it urgently, for 4 days to 7 days arrive;

3) By express when in small volum and need it urgently, for 4 days to 7 days arrive.

               Many people come to us with new ideas for inflatables, and many of these ideas are very good. As a matter of policy and good business, XiangHe Inflatable Products Factory, does not replicate other manufacturers proprietary products without written authorization from the manufacturer. If you have an idea or a product that you want to have produced, the following explains the process from start to finish.    

Step 1: Initial Meeting / Discussions Step 2: Submission to Design &    Engineering (D&E) Step 3: 3 Dimensional Drawings  Step 4: Pricing  Step 5: Mechanical Drawings Step 6: Preliminary Review and Approval  Step 7: Patterning  Step 8: Prototyping (Conditional)  Step 9: Final Approval  Step 10: Production More

About our factory:

We are established  in 2007,With more than 10 years of production experience,We are  specialized in various kinds of inflatable, like inflatable slide, bouncer & castle, obstacle, tent, advertisement, water games, sport games etc;

• Number of Production Lines:  4;
• Number of R&D Staff:1-5 People;
• Management Certification: EN14960:2004, AS 3533.4.1
• Contract Manufacturing:  Buyer Label Off, OEM and Design Service Offered;
• Factory Size (ters): 3,000 square meters;

Our Industry-leading equipment, such as double-thread sewing machines, high-temperature welding machines, high-frequency welders, computer-controlled cutting machines, and digital inkjet printers.

Our team and our workshop , production machine pictures: