Zorb ball is a double-sectioned sphere, with one ball inside the other with an air layer between. This acts as a shock absorber for the rider, damping bumps while traveling. Zorb balls are lightweight and made of flexible plastic. Many zorb balls have straps to hold the rider in place, while others leave the rider free to walk the zorb ball around or be tossed about freely by the rolling motion - water can be added inside, and this is commonly called a "water or aqua ride". A typical zorb ball is about 3 metres (9.8 ft) in diameter, with an inner zorb size of about 2 metres (6 ft 6.7 in), leaving a 50–60 centimetre (20–24 in) air cushion around the riders. The inner and outer zorb ball are connected by numerous (often hundreds) small ropes. Zorb balls have one or two tunnel-like entrances.

a. For good quality zorb balls, the head of person should point to the interior of zorb ball after the harness is fixed. Otherwise the person will be possible to fall out of the zorb ball during zorbing!

b. For good quality zorb balls, the shape should be round. Otherwise the zorb ball will be not able to endure the pressure evenly during zorbing!

c. For good quality zorb balls, the harness should be strong enough. Otherwise the person will be possible to fall off during zorbing!

d. For good quality zorb balls, the plug should be in hourglass shape. Otherwise it will be possible to be squeezed out of the entrance during zorbing!

1. Durable Material with EN-71 certification

Top quality material are always applied on our inflatables, all of them are made from the best material suppliers in China - Plato chemical; all of the material meets EN-71 certification.

2. Computerized automatic cutting system
Base on the perfect design, the raw material of our inflatables are cut out the by computerized automatic cutting system which can ensure the perfect shape of each products.

3. High precision stitching machine and cultivated stitching workmanship
All of our sewing inflatables are stitched by high precision stitching machine with super excellent 9 in 1 waterproof nylon threads, like the following image shows.
The length of every single stitching is around 4mm, which is the top standard in inflatable field; most importantly, we always apply double stitching anywhere on the inflatables and quadruple stitching in positions where may sustain much force and pressure from jumping.
These techniques are applied to our inflatable bouncer, inflatable castle, inflatable slide and inflatable amusement park and so on.

4. Well experienced heat welding machine and perfect welding work
All of our air-sealed inflatables are made with high temperature multifunctional welding machine, which is necessary and efficient for massive air-sealed inflatables, such as inflatable water games, zorb seires, swimming pools, air-sealed inflatable tents etc.

We also supply other inflatable products, pls choose demand items as below.

Pls feel free to click below "Send" for more details regarding inflatable foot dart.

Thanks for your visiting, thanks!