Corrugated sheet making machine

I.Technical specification:

1.Valid width:1300mm

2.Total length of assembly line: 36meters, area: 40*9*4.5 cubic meters

3.Max speed: 30 meters/min

Notice: adopt standard paper width:1300mm,economic speed:20meters/min

Paper: 110-175g/m2   (contain water: 8%-9%)

Tension strength: 3-5kg/cm2

Corrugated paper: 100-130g/m2 (contain water8%-9%)

Inside paper: 100-250 g/m2(contain water8%-9%)

Ring crush strength: >8-14kg/ cm2

4. Heating method: electric heating

5. Power:about 180kw

Draw of layout below:

Customer should prepare these things below:
Fundamental project,hydroelectric project,main power source
raw paper for adjustment, starch
lubricating engine oil,grease,gear oil
The user provide auxiliary tool in installment progress(electrowelding machine,cutting machine,pipe,profiling board,lampstand,pipe cutter,gas cutting,gas welding etc.)
service promise
product quality check according to carton industry standard
The supplier guarantee for one year, and provide paid service for the quality problem by the buy’s improper use or bad keeping

1.Hydraulic Roll Stand:

Applicable paper roll: Max weight: 1.5T (one arm), max size 1.8m (breadth)x1.5m (diameter), min size 0.6m (breadth);electrical rise and fall,

clamping, and releasing, alignment to left and right direction; capable of holding 2 rolls of paper at one time, roll reloading without machine stop.

Adjust the damp of tip cone by air cylinders.
Total power rate: 4KW/set

2.Single Facer

Ridge shape: he combination of B and B Ridge shape,
The ridge roller is made of high-grade steel alloy, with medium frequency quenching, gears thoroughly quenched, coated with hardened chromium.

Machine body hardness: ≥HRc42°; surface hardness: ≥HRc55°; Roller diameter: 216mm;

working life: more than 5 million meters: paste roller surface has netted lines and is coated with hardened chromium,

which keeps rotating after machine stopped; the press surface is processed by milling;

the upper ridge roller and pressure roller are controlled through compressed air system whose pressure is adjustable.
Total power rate:15KW/set

3.Bridge Conveyor

Particular instruction:
This part is main beam combined by 10#U steel,10# joist steel, 63# angle steel and vertical shaft.
Two sides have security fence,ladder(made by8# small U steel),high strength zig-zag pedal, ensure security of workers and operate convenience.
Surface of pulling shaft,tensioner shafet and transmission shaft grindly processed by hard chrome plating.
Vacuum absorb tension control, tube 5 inches,plus adjustment valve,blowing rate adjustable.
Motor-driven deviation rectify device one set, motor power:0.25KW,absorb fan power:2.2KW.
Deviation rectify baffle adopt double guide posts location, kad-screw driven,fast and accurate location,move smoothly.
Speed propotion selected properly, corrugated paper stacked tidy.

4.Twice gluer
Detailed insruction
Gluing roller surface curved 25line pit cobwebbing, hard chrome processed,gluing equality and durable.
Frictioning roller surface processed by hard chrome
The rest of guide paper roller plated hard chrome.
Pressing roller adopt pneumatic up and down, operating conveniently and flexible.
Manual adjust srape gap.
Gluing roller 216mm, scrape roller 110mm,paper pressing roller 110mm, preheat roller 270mm and 320mm

5.DF12 Double facer
Detailed instruction
Width of heatin g board:520mm,10 pieces adopt Q235B container board steel, surface bunished, length of cooling section:4.5 meters
Heat conduction pipe seperated 2 parts controlling temperature.
Heating board adopt dense type pressing roller,motor-driven up and down pressing roller.
Adopt domestic superior steel board.
Up conveyor with tight system,manual.
Up conveyor with leftand right adjustment,manual.
Down conveyor with tight system,manual.
Driven section up roller320mm,outpack wearproof material.
Driven section down roller320mm,outpack wearproof material.
Transmission with guide roller200mm and 140mm.
Main frame adopt 20#U steel composed
Gear transmission, oil immersion lubrication
Manual deviation rectify devise for one set.
Pipe adopt flange combination, all the spacer adopt metal material.

6. MSS Thin blade slitter & score

The machine is featured with thin cut and auto blade sharpening; cutting and line pressing movement is driven by motor;

Its speed is under auto monitoring; equipped with 4 blades and 6 lines; cut specifications and line distance is manually adjustable;

alignment of whole machine electrically; press axel and wheels are plated with hardened chromium.

7.Mechanical transverse cutting machine

Detailed instruction:
Motor pedestal and wall board adopt ash cast iron, good steel performance, strong capability of quake-proof.
cutting length:500mm-2000mm,cutting precision: ±2mm(stead speed)
Transverse blade adopt brigandine feng steel straight knife blade, knife shaft transmission gear adopt precise forging steel material high frequency hardening,

ensure no gap transmission, high transmission precision,long-life, knife shaft adopt straight knife structure.
Adopt hollow knife shaft, swift,accurate and steady.
Key section shaft adopt imported shaft.

Notice:Pictures only reference,machine apply to entity,color according to customer